499893
11
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
CMS-TS-55-R
11
GB
Original operating manual
The illustrations specified are located at the begin-
ning and end of the operating manual.
1Symbols
2Items included
3Technical data
4 Intended use
The following Festool plunge-cut saws can be in-
stalled in the CMS-TS-55-R retaining panel:
TS 55 REBQ, TS 55 REQ, TS 55 RQ
The installation of other portable circular saws is
not possible and therefore not permitted.
Fit one of the above-mentioned portable circular
saws to the retaining panel and install it in the
CMS-GE to form a mobile bench-mounted circular
saw.
Plunge-cut saws are intended to be used for sawing
wood, materials similar to wood, plaster and ce-
ment-bonded fibre materials and plastics. When
fitted with special saw blades for aluminium of-
fered by Festool, these machines can also be used
for sawing aluminium.
5 Safety instructions
5.1 General safety instructions
WARNING Read all safety warnings and all
instructions provided with the working
stand and the power tool to be mounted.
Failure to
follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
Keep all of the attached documents and pass on
the documentation if the machine changes own-
ership.
Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments or changing accesso-
ries.
Accidental starting of the power tool is a
cause of some accidents.
Properly assemble the working stand before
mounting the tool.
Proper assembly is important
to prevent risk of collapse.
Securely fasten the power tool to the working
stand before use.
Power tool shifting on the
working stand can cause loss of control.
Place the working stand on a solid, flat and level
surface.
When the working stand can shift or
rock, the power tool or workpiece cannot be
steadily and safely controlled.
Do not overload the working stand or use as lad-
der or scaffolding.
Overloading or standing on
the working stand causes the stand to be “top-
heavy” and likely to tip over.
1 Symbols................................................ 11
2 Items included...................................... 11
3 Technical data ...................................... 11
4 Intended use......................................... 11
5 Safety instructions ............................... 11
6 Assembly .............................................. 12
7 Power supply and start-up................... 13
8 Settings................................................. 13
9 Working with the machine ................... 14
10 Service and maintenance..................... 14
11 Environment......................................... 14
12 EU Declaration of Conformity .............. 14
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
[1-1]
Cutting depth adjuster
[1-2]
Switch-on clip
[1-3]
Flange bolt
[1-4]
Scales/rulers
[1-5]
Retaining panel for portable circular saws
[1-6]
Protective cover
[1-7]
Protective cover bracket
[1-8]
Push stick
[1-9]
Preset profile setting rail
Module mounting / retaining
panel
CMS-TS-55-R
Inclination 0° to 45°
Cutting depth at 0° 0 - 51 mm
Cutting depth at 45° 0 - 38 mm
Weight 3,3 kg
WARNUNG
The user will be liable for damage due to improp-
er use.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool CMS TS 55 R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool CMS TS 55 R in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 3,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info