573139
9
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
9
Technical data CMS-PS 200/PS 300
Saw blade, maximum permissible length of
teeth:
Wood 105 mm
Aluminium, steel 60 mm
Weight 3.3 kg
The specifi ed illustrations can be found at the
beginning of the operating instructions.
Scope of delivery
- Retaining panel for jig saw (1.1)
Graphical symbols
Caution. Danger!
Read the operating instructions/notes
1 Intended use
The following jig saws can be fitted to the retain-
ing panel (1.1):
- PS 200 E
- PS 2 E
- PS 2
- PS 300 Q
- PS 300 EQ
- PSB 300 Q
- PSB 300 EQ
- PS 400 EBQ
- PS 420 EBQ
- PSB 400 EBQ
- PSB 420 EBQ
The installation of other compass saws is
not possible and therefore not permitted.
Fitting one of the abovementioned jig saws to
the retaining panel and installing it in the CMS-
GE/Basis Plus forms a mobile benchsaw. These
machines are intended to be used for sawing
woodand wood-like materials. With the special
saw blades offered by Festool, also plastics,
steels, aluminium, nonferrous metals and cera-
mic tilescan be cut. documents for the individual
materials.
The user is liable for damage and injury
resulting from incorrect usage!
2 Safety instructions
2.1 General Safety Rules
WARNING! Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fi re and/
or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool“ in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2 Tool-specifi c safety rules
- Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments or changing
accessories. Accidental starting of the power
tool is a cause of some accidents.
- Properly assemble the working stand before
mounting the tool. Proper assembly is impor-
tant to prevent risk of collapse.
- Securely fasten the power tool to the working
stand before use. Power tool shifting on the
working stand can cause loss of control.
- Place the working stand on a solid, flat and
level surface. When the working stand can shift
or rock, the power tool or workpiece cannot be
steadily and safely controlled.
- Do not overload the working stand or use as
ladder or scaffolding. Overloading or standing
on the working stand causes the stand to be
“top-heavy” and likely to tip over.
- Prior to initial operation, the jig saw blade must
be checked for secure seating and smooth run-
ning.
- Always use a push stick when making longitu-
dinal cuts in workpieces that are narrower than
120 mm.
- Secure round timber on either side of the saw
blade to prevent it from turning.
- Never work with a damaged jig saw.
- Avoid overloading the jig saw.
- Before transporting the machine, remove the
jig saw blade.
- Wear suitable protection such as ear protection,
safety goggles, a dust mask for work which
generates dust, and protective gloves when
working with raw materials and when changing
tools.
3 Fitting
Always remove the power supply plug
from the socket before carrying out any
work on the machine.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool CMS-PS200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool CMS-PS200 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 2,63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info