764185
2
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
EN
2
TILE CUTTER
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europeís leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive Warranty.
We hope you will enjoy using this product for
many years to come.
Read the operating instructions
carefully before using this device.
Familiarize yourself with its functions
and basic operation. Service the device
as per the instructions to ensure that it
always functions properly. The
operating instructions and the
accompanying documentation must be
kept in the vicinity of the device.
Contents
1. Technical specifications
2. Safety instructions
3. Assembly
4. Use
5. Maintenance
1. Technical specifications
max. 10 mm
max. 400 mm
30-80 mm
0-45°
2. Special safety instructions
1. The tile cutting machine is fitted with a
replaceable circular blade. Therefore, keep
children away.
2. After use the machine must be stored in a
safe and dry place, away from children.
3. This machine has been designed for cutting
and breaking glazed tiles, and must not be
used for any other purpose.
4. When using the tile cutting machine make
sure to keep extension leads and such away
from the machine.
5. Always place the tile cutting machine on a
level and firm surface.
6. CAUTION! The edges of cut tiles are sharp.
3. Assembly
Assemble the tile cutting machine as shown in the
drawing.
Assembly of the tile cutting machine
Remove all the parts from the box and assemble
the tile cutting machine as follows:
1. Slide the black rubber feet (T) over the
corners of the tile cutter. Slide a washer onto
the bolt and push this into the rubber foot.
Now slide a washer and a nut over the bolt on
the back and fasten this properly. Repeat this
for the other three corners.
2. Mount the fastening blocks (N) with the 2
tubes (M) onto the bottom plate (V) using the
4 bolts (O) and washers (P).
3. Screw the lever (H) onto the tube fastening (I).
4. Finally, mount the sash angle (U) onto the
bottom plate (V) using the knob (S) and
washer.
Assembly of the hollow square chisel
1. Place the hollow square chisel above the hole
in the bottom plate (V).
2. Make sure that the clamping plate (E) comes
under the 2 tubes and fasten this using the
socket head wrench supplied. The socket
head wrench is situated in the black fastening
plate (C).
3. It is important that the drill (G) and the knife
(F) are adjusted in such a way that they just
touch the bottom plate (V). This adjustment
can be done using the two nuts at the top of
the hollow square chisel. Then fasten these
nuts against each other.
3. How to cut and break tiles
1. Use a soft-tipped (carpenter’s) pencil to mark
off the cutting line.
2. Place the tile against the stop, the glazed
side facing upward. The pencil mark must be
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ferm TCM1012 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ferm TCM1012 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 2,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info