509992
17
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
17
The safety regulations specified elsewhere in this booklet must be taken into account at all times in order
to prevent damage to the machine and the surface to be cleaned and personal injury.
ASSEMBLY
Place the cleaner as close as possible to the water supply.
The cleaner must be placed upright on a robust, flat and
horizontal surface (handle on top).
Insert the end of the lance extension completely into the handle
(A) and secure it with a quarter turn (B). Then fasten the
connection by tightening the coupling nut. See diagram 1.
Fasten the jet lance to the lance extension by inserting the end
of the jet lance completely into the lance extension and
securing it with a quarter turn.
The Force 1400 also has a turbo-lance as standard, which can
be used instead of the normal jet lance if desired.
Connect the handle to the high-pressure hose. See diagram2.
Connect the high-pressure hose to the water inlet of the
machine.
Fasten the female quick-lock to the water supply hose and then
connect them to the water inlet of the machine. The (not
supplied) water supply hose must have a minimum diameter of
13 mm (1/2”) and be reinforced.
Attention!
The water supply must supply at least the water consumption of the machine (330 l/h)! The pump
must always be supplied with sufficient water. ’Dry operation’ causes damage.
The water temperature may not exceed 40°C. The pressure of the water supplied may not exceed
0.7 MPA (7 bar).
Only use clean water with this machine. Impurities or aggressive chemicals damage the machine!
OPERATION
Turn the On/Off switch to the OFF/O (Off) position.
Check that the specifications of the socket that you wish to use correspond with those on the type
plate of the machine. If this is the case, insert the plug into the socket.
Open the water supply completely.
Unlock the safety lock under the handle.
Now squeeze the trigger for several seconds in order to de-aerate the hose.
Switch the machine on by switching the On/Off button to I/ON. The motor will start briefly, but will
stop again as long as the trigger is not squeezed.
Now squeeze the trigger – the machine will start.
The automatic start/stop system means that the motor only works when the trigger is
squeezed.
The jet produced by the jet lance can be adjusted from narrow to wide by turning the head of the
lance. Never do this while spraying!
The turbo-lance (Force1400) creates a narrow rotating jet.
TIPS FOR USE
When the water jet leaves the nozzle it causes the handle to recoil. You must therefore ensure that
you are standing in a stable position and have a firm grip. Also ensure that the high pressure of the
water jet does not cause objects to move out of place or fall or fly around and cause damage. Also
select a safe location for yourself!
Keep your work environment clean and tidy.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Eurom-Force-1400

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eurom Force 1400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eurom Force 1400 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1,32 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info