755732
12
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
20 21
Replace the Side Brushes
The side brushes may become bent or damaged after being used for a period of time.
Follow the instructions below to replace them.
Use a Phillips screwdriver to unscrew the screws on the side brushes.
Pull off the old side brushes and snap the new ones into place.
Screw down the screws to fasten the side brushes.
Troubleshooting
Problem Solutions
RoboVac cannot be
activated.
•Make sure the main power switch is in the ON position.
•Make sure the battery is fully charged.
•Replace the batteries (2 AAA) in the remote control.
•Make sure the remote control is within range (less than
6 ft/3 m from RoboVac).
•If you still have trouble, turn o the main power switch and
then turn it on.
The remote control
does not work.
•Replace the batteries in the remote control.
•Make sure RoboVac is turned on and fully charged.
•If RoboVac works properly but does not respond to the remote
control’s commands, it may be because the remote control has
not been paired with RoboVac.
In this case, do not dock RoboVac to the Charging Base. Turn o
the main power switch and then:
(1) press and hold on the remote control for 3 seconds;
(2) turn on the main power switch.
You will hear three beeps after successful pairing.
RoboVac stops
working suddenly.
•Check if RoboVac is trapped or stuck on an obstacle.
•Check if the power level is too low.
•If you still have trouble, turn o the main power switch and
then turn it on.
You cannot schedule
cleanings.
•You can set the time and scheduled cleaning time via the
EufyHome app.
•Make sure the scheduled time has been set correctly.
•Check if RoboVac’s power is too low to start cleaning.
Suction power is weak.
•Check if any obstructions are blocking the suction inlet.
•Empty the dust collector.
•Clean the filter with a vacuum cleaner or a cleaning brush.
RoboVac cannot be
charged.
•Check if the Charging Base is plugged into the outlet.
•Dust o the charging contact pins with a dry cloth.
RoboVac cannot
return to the
Charging Base.
•Remove objects within 3 ft/1 m of the left and right side and
within 6 ft/2 m of the front of the Charging Base.
•When RoboVac is in the vicinity of the Charging Base, it will
return more quickly. However, if the Charging Base is located far
away, RoboVac will need more time to return. Please be patient
as it works its way back.
•Clean the charging contact pins.
The rolling brush
does not rotate.
•Clean the rolling brush.
•Check if the rolling brush has been installed properly.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eufy RoboVac 11C Pet edition - T2111 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eufy RoboVac 11C Pet edition - T2111 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info