674833
13
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
22 23
Wi-Fi Connection
Before Wi-Fi setup, make sure RoboVac and your Wi-Fi network meet the following
requirements.
Wi-Fi Setup Requirements
RoboVac:
RoboVac is fully charged and the main power switch on the side of RoboVac is turned
on.
Wi-Fi status light flashes blue slowly.
Wi-Fi network:
Use the correct password for your network.
Do not use a VPN (Virtual Private Network) or Proxy Server.
Your Wi-Fi router supports 802.11 b/g/n and IPv4 protocol.
Your router is either 2.4GHz or a dual band router that is configured to support 2.4
GHz.
RoboVac does not support 5 GHz band.
- If RoboVac cannot connect to the Wi-Fi network and you are using a 2.4/5 GHz
mixed network, switch to a 2.4 GHz network for Wi-Fi setup. You can switch
back once your setup is complete.
- When connecting to a hidden network, make sure that you have used the correct
network name, SSID (case sensitive), and that the wireless frequency is 2.4GHz.
- When using a network extender/repeater, make sure the network name (SSID)
and password are the same as your primary network.
- The firewall and port settings of your Wi-Fi router allow RoboVac to connect
with the Eufy servers.
Network Security Requirement
- WPA and WPA2 using TKIP, PSK, AES/CCMP encryption.
- WEP EAP (Enterprise Authentication Protocol) is not supported.
Wi-Fi Channels
- The FCC requires all wireless devices in the United States are operated on
wireless spectrum channels 1-11.
- Some countries outside North America can use spectrum channels above
channel 11. Refer to your local regulatory agency to determine which channels
are accessible.
- A future software release will support access to channels above 11 for users
outside North America. Until then, use channels 1-11.
If you cannot control RoboVac with your smartphone, find the solutions below to solve the
problem. If the problem persists, contact the Eufy service center for help.
Wi-Fi Status Light
Cause Solution
Solid blue
RoboVac has connected to your
router, but cannot access the
Internet
• Check if your router is connected
to the Internet.
• Check with your Internet provider
to see if there is any Internet
connection problem.
Flashing blue quickly
RoboVac cannot connect to your
wireless router.
• Check if you have modified your
network name and password.
• Reset the Wi-Fi connection if
necessary. Refer to this section
Use Your RoboVac with
EufyHome App > Reset the Wi-Fi
connection
Flashing blue slowly
Wi-Fi connection is reset or has
not been set up before.
• Set up Wi-Fi connection with
RoboVac. Refer to this section
Use Your RoboVac with
EufyHome App”.
• Reset Wi-Fi connection if
necessary. Refer to the section
Use Your RoboVac with
EufyHome App > Reset the Wi-Fi
connection”.
O
• RoboVac is turned o.
• RoboVac’s power level is low.
• RoboVac is in Sleep Mode.
• Charge RoboVac by attaching it
to the charging base. Make sure
the main power switch on the
side of RoboVac is turned on.
Specifications
Product Model T2103
Input
19 V
0.6 A
Voltage DC 14.8 V
Power Consumption 27 W
Battery Type DC 14.8 V Li-ion 2600 mAh
Dust collector capacity 0.6 L
Cleaning Time Max 100 mins
Charging Time 300 - 360 mins
Operating Frequency Range 2412 MHz - 2484 MHz
Max Radio-Frequency Power 2 W
Input
19 V
0.6 A
Output
19 V
0.6 A
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eufy RoboVac 11C - T2103 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eufy RoboVac 11C - T2103 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info