617854
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
1. Install dedicated software, "Epson iLabel"
Using the Printer
3.
Place a tape cartridge in the printer as shown.
Pass the end of the tape
through the gap.
4.
Close the printer cover.
CAUTION
Always use dedicated tape cartridges having
the
symbol. Always perform the tape feed
operation after inserting a tape cartridge.
1.
Remove any slack in the tape inside the tape
cartridge.
Use a pen or
a pencil.
2.
Pull the tab to open the printer cover.
Using the AC adapter
CAUTION
Always use the included AC adapter.
1.
Connect the included AC adapter
(AST1116Z1-1) to the printer, and plug the
power plug into a power outlet.
Peel o the backing paper of the printed label to stick it onto an
object.
Using mobile device
Use the dedicated application "Epson iLabel" to create and print
labels.
See the Epson website for more information.
http://www.epson.com
Using computer
Create labels with the label editing software "Label Editor" and print.
See the following manual for the procedure:
Label Editor User's Guide.
1.
Peel o the backing paper.
Backing paper
2.
Attach the label and rub it  rmly.
Printer Setup
Printer power does not turn ON.
Check that the power cable is connected properly, or that
batteries have been properly inserted. If the power still does not
turn ON, contact your place of purchase or the Epson Customer
Support Center.
If a message is displayed on your computer or mobile device
screen, check the message information.
Unable to perform Bluetooth connection (pairing) with the
printer
Check to see if the printer's
lamp is fading in and out. If not,
enable Bluetooth on the printer and then try performing the
operation.
Check that the printer communicating with another mobile
device. If the printer is already communicating with one mobile
device, it is unable to communicate with another mobile device.
If a message is displayed on your mobile device screen, check
the message information.
Connection was interrupted during connection (pairing) with the
printer.
Check to see if the printer's
lamp is fading in and out. If not,
enable Bluetooth on the printer and then try performing the
operation.
If the printer is connected to a computer with a USB cable
while the printer is communicating with a mobile device, the
communication with the mobile device is terminated. Terminate
the printer's connection to the computer, then redo the pairing
setting.
If a message is displayed on your mobile device screen, check
the message information.
Troubleshooting
Connecting a Mobile Device
Creating a Label
Connecting a Computer
1. Prepare the power supply. 2. Inserting the tape cartridge in the printer
1. Creating and printing a label 2. Attaching a label
This section describes all the procedures from printer setup to printing and attaching a label.
Procedures for  rst-time printer use
Using mobile device
1.
Printer setup (power supply, tape cartridge)
2.
Download and install a dedicated application
3.
Connect the printer to your mobile device
4.
Start the dedicated application on your mobile device to
create/print label
5.
Attaching a label
Using computer
1.
Printer setup (power supply, tape cartridge)
2.
Start computer
3.
Insert included DVD-ROM, install editing software and
printer driver, and connect the included USB cable
4.
Start the dedicated software on your computer to create/
print label
5.
Attaching a label
Where to download the software
iOS Android
Download from:
Check that Bluetooth is enabled on the printer before
performing the procedure.
The lamp fading in and out when
Bluetooth is enabled on the printer.
If Bluetooth is disabled on the printer, enable Bluetooth
following the steps described below.
1.
Press the button to turn the printer power OFF.
2.
Press the button and the Bluetooth button at the
same time.
2. Bluetooth connection
setup (pairing)
CAUTION
Place your mobile device no more than one meter away from the
printer when making the settings.
Android Devices
1.
Turn the mobile device power ON and start the "Epson iLabel"
software.
2.
From "Settings" in the home screen, tap "Wireless & Network"
and check "Bluetooth" checkbox.
3.
Tap "Scan for devices".
Scanning starts.
It may take some time for the printer to be displayed.
4.
The printer is displayed when scanning has  nished. Tap the
printer.
Pairing is completed.
iOS Devices
1.
Turn the mobile device power ON.
2.
From "Settings" in the home screen, tap "General". Then,
select "Bluetooth", and turn the "Bluetooth" selection ON.
3.
The printer is displayed under "Devices". Tap the printer.
4.
When a message to con rm connection with the printer
appears, tap "Pair".
It may take some time for the printer to be displayed.
Pairing is completed.
CAUTION
The editing software and printer driver must be installed in the computer
before doing the steps below. See the following manual for the
procedure: Label Editor User’s Guide.
Do not connect the printer and computer before installing the software.
Connect the printer as directed in the installation screen.
1.
Start the computer, and connect the
included USB cable.
When printer is connected to a mobile device using a
Bluetooth connection
1.
Press the button to turn the printer power OFF.
2.
Turn o Bluetooth on your mobile device.
2.
Connect the USB cable to the printer's
USB port.
Using batteries
CAUTION
Always use AA-size alkaline dry cell batteries.
1.
Open the battery cover at the bottom of
the printer.
2.
Insert batteries.
Batteries: AA alkaline battery x 6
3.
Close the battery cover.
You can use the printer by one of the two methods below.
Meanings of lamps
The lamps indicate printer statuses.
Lamp's condition
Printer status
*
: Depends on printer operation status
--: Unlit
--
*
Fading in and out Bluetooth enabled.
* *
Lit Bluetooth connection completed.
--
*
Flashing quickly Performing operation such as printing or label cutting.
--
*
Flashing
(once every 5 seconds)
Bluetooth disabled.
-- -- -- Power OFF.
*
Lit
*
Low batteries and need to be replaced. Have replacement batteries ready.
*
Flashing quickly
*
Replace batteries.
Flashing quickly
* *
Printer error. Check the message displayed on the connected computer or the
mobile device.
When printer is connected to computer with a USB cable
1.
Press the button to turn the printer power OFF.
2.
Disconnect the USB cable.
3.
Unplug the power cable from the outlet, and disconnect the
AC adapter plug from the printer.
When Finished Using Printer
Printer does not print when print operation is directed.
If a message is displayed on your computer or mobile device
screen, check the message information.
Check that connection cables are connected properly, that the
tape cartridge is mounted properly, and that the cover is closed
properly.
Have you selected the printer to be used? Printing will not be
done properly if another printer is selected.
Did you restart the computer after installing the printer driver?
The printer driver may not be installed correctly if the computer
was not restarted. Reinstall the printer driver.
Text is not printed properly.
Check that the tape cartridge is properly mounted.
Lines appear on printed labels.
The print head is dirty. Clean the print head. See "Cleaning".
Canceling a print job
Check the printer's power in ON, then press
button on the front
of the printer brie y once.
Labels are not cut automatically
Is the cutter blade worn? Prolonged use of the cutter can wear
down and blunt the blade. Contact the Epson Customer Support
Center.
Problems not indicated by lamps
3.
Turn the printer power ON.
MEMO
The printer can be connected to a computer and a mobile device at the
same time, but once you have executed a printing or other operation from
one of these devices, you can no longer operate it from the other device.
Similarly, when the printer is communicating wirelessly (pairing) with
one mobile device, the printer cannot be operated from another mobile
device.
Application installation procedures and information on application
functions are provided on the software download page.
See the Epson website for information on the latest supported
operating systems.
http://www.epson.com
Connect the printer to your mobile device using a Bluetooth connection.
Install the dedicated application "Epson iLabel" in the mobile device.
Use the included USB cable to connect the printer to the
computer.
Windows
Install the editing software and printer driver from the
included "Label Editor DVD-ROM".
Mac OS X
Download the editing software and printer driver from the
Epson website: http://www.epson.com
Auto power-o
The printer's power turns o automatically when the
printer has not been used for a preset amount of time.
Preset time when using the AC adapter: About 8 hours
Preset time when using batteries: About 20 minutes
The shortest label you can create with this printer is
approximately 22 mm long.
When creating a label shorter than 22 mm long, cut the
margins with scissors.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Epson LabelWorks LW-600P bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Epson LabelWorks LW-600P in de taal/talen: Engels als bijlage per email.

De handleiding is 1,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Epson LabelWorks LW-600P

Epson LabelWorks LW-600P Installatiehandleiding - Nederlands - 2 pagina's

Epson LabelWorks LW-600P Installatiehandleiding - Deutsch - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info