547014
5
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
5
CONTROL PANEL
CHOOSING THE DETECTOR TYPE
Zone 1 provides standard intruder monitoring with
normal ARM and PART-ARM function.
Zone 2 provides ARM function.
Panic zone is used to provide 24 hour monitoring of
areas requiring continuous security protection even
while the system is disarmed. Activation of any
detector will immediately initiate a full alarm condition.
Note: Up to 10 different ID code of detectors can be
learned in Zone 1, Zone 2 and panic zone respectively.
Note: Up to 4 pcs of remote controller, 1 pc of wireless
keypad (SA401) and 1 pc each of outdoor and indoor
siren can be learned by Control Panel.
LEARNING ID CODE OF DETECTORS
Upon completion of selecting type of detector as
mentioned above, proceed with the following steps:
Press
User access code
The Control Panel will enter learning mode of which UI
indication refers to “UI_Wait”. The Control Panel has
a 30-second to learn one ID code from the
detector/remote controller/wireless keypad.
For detector, press the tamper switch on the detector
so as to emit ID code to the Control Panel.
Three LED will flash in sequence on the Control Panel,
it helps you to determine which zone the detector
should be assigned. Users have a 6-second to input
zone number. If the detector is to be assigned in Zone 1,
press keypad ; Zone 2, press keypad
;
whereas Panic zone, press keypad on the
Control Panel.
Note: It is recommended that the smoke detector and
flood detector are assigned to panic zone.
For wireless keypad, press the tamper switch on the
device so as to emit ID code to the Control Panel
automatically.
For remote controller, press any key on it so as to emit
ID code to the Control Panel automatically.
If failed refers to UI_Error indication for confirmation.
CLEARING ID CODE OF DETECTORS
Press
User access code
The Control Panel will enter clearing mode of which UI
indication refers to “UI_Wait”. Users have 15-second
to clear ID code.
Following is the instruction to clear ID code stored in
each zone.
Press for zone 1
User access code
Press for zone 2
User access code
Press for panic
User access code
Press for remote
User access code
Press for keypad
User access code
Press for all ID
User access code
LOCATING THE CONTROL PANEL
When choosing a suitable location for the Control Panel,
the following points should be considered.
1. The Control Panel should be located in a position
out of sight of potential intruders and in a safe
location, but easily accessible for system operation.
2. The Control Panel should be mounted on a sound
flat surface to ensure that the rear tamper switch on
the Control Panel is closed when the Panel is
mounted. The Control Panel should be mounted
at a convenient height of between 1.5 and 2m and
in a position where it will be seen each day.
Note: If small children are in the household, a
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eden HA700 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eden HA700 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,95 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Eden HA700

Eden HA700 Gebruiksaanwijzing - Deutsch - 29 pagina's

Eden HA700 Gebruiksaanwijzing - Français - 29 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info