300889
5
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
2
English
Settings
Connection
1. Connect the telephone cord to a network wall socket and to the
T
socket on the back of the telephone.
2. Connect the curly cord to the handset and to the socket marked
q
on the side of the telephone.
3. You will hear a click when the modular plug is correctly in place.
4. Set correct Flash button time to 100 (see Technical Information).
5. Lift the handset and listen for the dial tone.
Ring signal
The ringer volume can be adjusted using .
Memories
Saving speed dial numbers
1. Make sure that the
R
/
P
switch on the base of the telephone is set to
P
.
2. Lift the receiver and press
P
(
R
) (ignore anything you hear in the
earpiece).
3. Enter the phone number (up to 16 digits) using the keypad. Press
P
(
R
).
4. Select memory position by pressing the corresponding button.
5. Replace the handset. The number has now been saved.
Remember to return the
R
/
P
switch on the base of the telephone to the
R
position when all the telephone numbers have been saved.
Press if you want a pause in the telephone number.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels