790947
51
Verklein
Vergroot
Pagina terug
1/120
Pagina verder
ENGLISH
49
back and forth between the Y- and
X-axes as follows:
Immediately (within 5 seconds) after
entering Manual Slope Mode, press
and hold the remote control right arrow
button to activate Manual X Mode.
The unit can be changed back to
Manual Y Mode by immediately
pressing and holding the remote control
left arrow button.
To change the direction of Manual
Slope Mode at a later time, re-engage
full self-leveling, then activate Manual
Slope Mode again and go through the
axis selection procedure outlined above.
The X and Y LED indicator lights on the
laser unit control panel (k, l) will indicate the
manual slope direction that is selected. The
manually controlled axis is identified by a
turned-off LED, and the self-leveling axis is
identified by a lighted LED.
Setting the Amount of Slope:
Once Manual Slope Mode is activated, the
amount of slope can be manually adjusted
using any of the following methods:
Use the laser control panel up and down
arrow buttons (h, i) to tilt the laser rotor
head up and down.
OR
Use the remote control up and down
arrow buttons (p) to tilt the laser rotor
head up and down.
OR
The entire laser unit can be tipped up and
down by setting it on a sloped surface.
Make sure the laser unit is positioned so
the direction of manual sloping is lined
up in the same direction as the sloped
surface.
REMOTE CONTROL: ARROW BUTTONS
The arrow buttons (p, q) are used for different
functions depending on the operating mode of the
laser unit.
In Self-Leveling Horizontal Mode:
The up and down arrows (p) adjust the length of
the laser line in Scan Mode.
The left and right arrows (q) adjust the direction
of the laser beam in Scan Mode or Pointing
Mode (0 rpm).
In Self-Leveling Vertical Mode:
The up and down arrows (p) adjust the position
of the laser line in Scan Mode.
The left and right arrows (q) move the laser
beam left and right.
In Manual Mode:
The arrow buttons (p) are used to tilt the laser
head up or down in the X or Y directions as
marked on the protective roll cage of the laser
unit.
REMOTE CONTROL: SPEED/ROTATION BUTTON
The speed/rotation button (r) is used to adjust
the speed of the laser beam through its 4 preset
speeds.
NOTE: The speed/rotation button performs the
same function as the speed/rotation button on the
control panel of the laser unit.
REMOTE CONTROL: SCAN MODE BUTTON
The scan mode button (s) is used to make the laser
head sweep back and forth, creating a short, bright
laser line. This short line is much brighter and more
visible than when the unit is in full rotation mode.
Using Scan Mode:
To enter scan mode, push and release the
scan mode button. To exit scan mode, push
and release the button again.
The size and direction of the scan zone can
be controlled with the arrow buttons on the
laser unit control panel or the remote control.
For a more detailed explanation, refer to
Arrow Buttons under Laser Control Panel
Buttons.
IMPORTANT: The remote control cannot be
used for User Defined Scan Mode.
REMOTE CONTROL: PUBLIC AND PRIVATE MODE
The DW079 Rotary Laser and the remote control
each have the capability to operate in either Public
Mode or Private Mode. For the laser and the remote
control to work together, they must both be set to
the same mode.
Public Mode
The remote control sends signals that can
potentially be received by multiple laser units as
well as other models of laser units. This is the
normal, default operating mode for the remote
control.
To activate Public Mode:
Press and hold the speed/rotation button
(r) (open padlock symbol beside the
button) for 4 seconds.
After an 8-hour period of inactivity, the
remote control will automatically enter
Public Mode.
51

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DeWalt DW079 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DeWalt DW079 in de taal/talen: Duits, Engels, Frans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 9,88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van DeWalt DW079

DeWalt DW079 Gebruiksaanwijzing - Nederlands, Italiano, Português, Espanõl, Türkiye - 116 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info