588917
6
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
44 45
4.2 Setting of the service interv
al
Press the right button until the
following display appears:
By pressing the left button for 3 sec,
this display now appears:
Setting of the service interval
Set with right button, save and continue with left button.
Default = 1000 (km or 625 miles) or the remaining value
up to the next service.
Range = 0 - 9999 km or 6249 miles
The service interval can be adjusted here, e.g. after how
many kilometers travelled should the brakes be checked or
similar. The service interval will count down until it reaches
zero. The service symbol will then appear in the
display.
Following this, a new service interval can be entered. The
service symbol is then deleted from the display.
4. 3 Initialization of the speed transmitter
(The CM 628 is delivered already initialised, i.e. this
adjustment is required only for a battery change without
power-saving mode, in case of a transmitter change, or if
the CM 628 should be used on a second bike)
Press the right button until the
following display appears:
By pressing the left button for 3
sec., this display now appears:
Initialization of the speed transmitter
The initialisation display appears.
If no speed transmitter is initialised (e.g. after a battery
change without power-saving mode, or if the CM 628 is to
be used on a second bike), start the initialisation now by
short pressing of both buttons (see below).
If a speed transmitter has already been initialised, change
into the operating mode through short pressing of the left
button.
Measurement of the wheel circumference (U)
(for more precise adjustment):
Make a marker on the front tire and on the floor (e.g. with
chalk). Move the bike straight ahead by exactly one tire
rotation (for a more precise measurement ensure tire
pressures are correct and be seated on the bike) and mark
the location on the floor. Now measure the distance exactly
between the two markers on the floor to give you the
wheel circumference (in mm)
Adjust total kilometers 1 and 2
Set with right button, save and
continue with left button.
Default = 0 km or last adjusted
value.
Setting range max. = 99999 km or
62499 miles.
The total amount of kilometers travelled up to now can be
adjusted here.
Cadence On/Off switching (ON/OFF)
Switch On and Off with right button
(continue with left button).
Here, the cadence can be switched
On and Off. The cadence should be
switched on only when a cadence
transmitter is also used (mounted),
since the CM 628 will normally
search for the relevant transmitter
indefinitely.
The default setting is 'oFF'.
Heart rate On/Off switching (ON/OFF)
Switch On and Off with right button
(continue with left button).
Here, the heart rate measuring can be
switched On and Off. The heart rate
measuring should be switched on only when a heart rate
transmitter is also used, since the CM 628 will normally
search for the relevant transmitter indefinitely.
The default setting is 'on'.
R
02 CM 628 englisch 34-65 19.05.2005 10:23 Uhr Seite 12
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ciclo CM 628 Master bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ciclo CM 628 Master in de taal/talen: Engels als bijlage per email.

De handleiding is 0,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Ciclo CM 628 Master

Ciclo CM 628 Master Gebruiksaanwijzing - Nederlands - 17 pagina's

Ciclo CM 628 Master Gebruiksaanwijzing - Deutsch - 17 pagina's

Ciclo CM 628 Master Gebruiksaanwijzing - Français - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info