588917
15
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
Initialization runs only very slowly and is then
interrupted with 'Error'
•Transmitter battery empty or transmitter defective
•Transmitter is already initialised for other bike. If, in spite
of this, the transmitter should be initialised for this bike, a
total reset must be made (press AC button for 3 sec.), so
that the already existing initialisation is deleted.
Caution: With this, all settings and total values are also
deleted!
Automatic transmitter search does not start when
bike is in motion/moved.
CM 628 is not seated (or is not seated correctly) on the
handlebar bracket
•A transmitter has already been received (SPD 0 in the
display), which can happen e.g., when a change is made
from one bike to another. As long as the CM 628 is still
located in the area of the first transmitter, the indication
0 remains in the display. Only when the CM 628 is
outside of the range of the first transmitter does the
indication ' - ' appear. With the next movement, the
transmitter search then starts automatically.
Individual values (e.g. distance or average speed)
still change at the end of the tour, although the
wheel is at a standstill and displays the speed 0.
The CM 628 has a built-in correction function, so that all
values are checked again at the end of the tour (if no
further signal comes in – SPD 0) and corrected, where
appropriate. It can happen through this correction
function that, at the end of a tour, individual values
change once again – both Up and Down.
11. GUARANTEE
We offer a guarantee for 24 months from the date of
purchase on the CM 628. The guarantee is limited to
material and processing faults. The batteries are excluded
from the guarantee.
The guarantee is valid only if the computer, with
accessories, has been handled and maintained carefully
and according to operating instructions.
To return the CM 628 under conditions/terms of the
guarantee, please refer to your dealer, your local distributor
or send the computer with the proof of purchase(date) and
all accessories, and with sufficient postage, to:
CICLO SPORT SERVICE
K. W. Hochschorner GmbH
Konrad-Zuse-Bogen 8
D-82152 Krailling
6362
Phone: 0049 180 /5 00 47 43 (EUR 0,12 min.)
Fax: 0049 89 / 714 07 83
E-Mail: ciclo-service@ciclosport.de
Please read through the operating manual again carefully
before sending in the device and check the battery.
In case of valid guarantee claims, the repaired device or a
replacement device will be returned free of charge.
Repair
If your CM 628 is sent in for repair (or battery change) or if
a guarantee claim is not valid, repairs up to EUR 19.- will be
carried out automatically.
In case of higher repair costs you will be notified.
The repaired device will be sent back COD.
12. TECHNICAL DATA
CM 628
Operating temperature:
0°C to 50°C
Battery:
Lithium CR2032
Average battery life:
1 year (based on average use of 1 hour per day)
Transmitter belt
Reach:
Up to 10 m
Operating temperature:
0°C to 50°C
Battery:
Lithium CR2032
Average ba
ttery life:
1 year (based on average use of 1 hour per day)
Transmission frequency:
868 MHz
Speed and Cadence transmitter
Reach:
Up to 2 m
02 CM 628 englisch 34-65 19.05.2005 10:23 Uhr Seite 30
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ciclo CM 628 Master bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ciclo CM 628 Master in de taal/talen: Engels als bijlage per email.

De handleiding is 0,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Ciclo CM 628 Master

Ciclo CM 628 Master Gebruiksaanwijzing - Nederlands - 17 pagina's

Ciclo CM 628 Master Gebruiksaanwijzing - Deutsch - 17 pagina's

Ciclo CM 628 Master Gebruiksaanwijzing - Français - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info