664853
3
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
Synchronize Time (Important Setting)
The time shown on your mobile device must be synchronized with the time
shown on the Server prior to setup. Operation history will only be recorded once
synchronization is complete.
Edit Accessories
Rename, add, delete and change the Zone Mode of each Sensor. (except the 24
Hour Zone). Remember to tap the Save button in the top right hand corner to save
the changes.
Normal Zone : Sensors set to Normal Zone are armed whether the alarm is in
Arm (Full Arm) or Home Arm (Part Arm) Mode. We recommend setting Window/
Door Sensors to Normal Zone.
Home Zone
: Sensors set to Home Zone are only armed in Arm (Full Arm) Mode.
If Home Mode (Part Arm) is used, these Sensors are not armed and will not activate
the alarm on trigger. We recommend setting PIR Motion Sensors to Home Zone.
24 Hour Zone : Sensors set to 24 Hour zone will activate the alarm when
triggered, regardless of the alarm status at the time (armed or disarmed).
Note: Smoke, Gas Leakage or Water Flood Sensors are automatically registered as 24 Hour
Zone Sensors and cannot be changed to Normal or Home Zone. Any Motion or Door/ Window
Sensor paired to the Control Panel by pressing the Tamper Switch will also register as a 24 Hour
Zone Sensor. A 24 Hour Sensor will activate the alarm when triggered, regardless of the alarm
status at the time (armed or disarmed).
Internal Siren
The volume level, alarm duration, and arm/disarm beep can be adjusted in the App.
Wireless Siren
When connecting an Outdoor Siren (optional accessory) to the Control Panel, it
can be enabled/ disabled by switching the Alarm option to on/off. The on/off arm/
disarm beep and alarm duration can also be adjusted.
Exit Delay Time
Set a time delay for you to leave your property without triggering an alarm.
Entry Delay Time
Set a time delay for you to enter your property without triggering an alarm.
Timed Arm/Disarm
The system can be programmed to automatically Arm and Disarm the alarm at
1. Set the time you want the alarm to arm (on the left)
2. Tap the Arm Button once to activate automatic arming and twice to disable it
3. Set the time you want the alarm to Disarm (on the right)
4. Tap the Disarm Button once to activate automatic disarming and twice to disable
the automatic disarming
5. Select the days you want the alarm to automatically arm/ disarm
6. Slide the switch to the ‘on’ position to activate the new schedule
Ringtone of Push Alert
The selected ringtone will be heard when a Push Alert is received.
History
page 13).
Passcode
We recommend that passcode protection is enabled to avoid unauthorized access
to the App.
Delete User
The alarm can be controlled by up to 5 Users who will also receive Push Alerts. To
delete a User Account from the App go to the submenu ‘More’ and select ’Delete
Users’
Normal Zone (Switchable to Home Zone or 24 Hour Zone)
Home Zone (Switchable to Normal Zone or 24 Hour Zone)
24 Hour Zone (Unchangeable)
functioning.
System Arm System armed by Remote Control
System Disarm System disarmed by Remote Control
System Home Arm System home armed by Remote Control
Arm by App System armed by App
Disarm by App System disarmed by App
Home Arm by App System home armed by App
Arm as Scheduled
System has auto-armed according to the ‘Timed Arm/
Disarm’ schedule
Disarm as Scheduled
System has auto-disarmed according to the ‘Timed Arm/
Disarm’ schedule
System SOS Alarm
Remote Control SOS button activation has triggered an
emergency alert
(Zone 1) Alarm A zone no. 1 sensor has been triggered
(Zone 1) Tamper
Alarm
Unauthorized attempt to remove the cover of a zone no. 1
sensor.
(Zone 1) Low Battery
A zone no. 1 sensor battery is low. Change the
battery as soon as possible.
Control panel AC failure Lost connection with AC Power
Control panel AC recovery Regain connection with AC Power
Installation
Control Panel
Wall Mounting
The Control Panel can be wall mounted using the Wall Bracket provided.
Using the screws supplied, mount the Wall Bracket onto the wall (ensuring that the arrow
on the bracket is pointing upwards), then match-up the Wall Bracket hooks to the holes
at the back of the Control Panel, and slide the Control Panel down onto the Wall Bracket.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Chacon 34948 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Chacon 34948 in de taal/talen: Nederlands, Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 32,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info