580402
3
Verklein
Vergroot
Pagina terug
1/47
Pagina verder
3
How to install the
unit on your bicycle
Setting up the
computer
How to use the
computer
Setup of your PC
Uploading the
measurement data
Changing the
computer
configuration
OthersIntroduction
Procedure of automatic recognition
The computer automatically recognizes the sensor ID according to the following procedure.
1
Signals from each sensor (speed, speed/cadence, cadence, heart rate, and power) are
searched at the time when the GPS search screen displayed when the power is turned
on, or the standby screen is changed to the measurement screen.
Caution: Any sensor that is not sending the sensor signal at this time cannot be
recognized. Each sensor sends the sensor signal in response to the
following operations.
Sensor type Method
Speed sensor
Move the magnet close to the sensor zone
(at a distance of less than 3 mm)
Speed/cadence (ISC) sensor
* When using the CATEYE speed/ca-
dence sensor (ISC-11), select [ISC]
to perform paring.
Cadence sensor
Heart rate sensor Wear the heart rate sensor
Power sensor Ride the bicycle lightly
2
Among the pairing-performed IDs of each sensor, the sensor with the strongest signal
is received. The sensor signal icon corresponding to the received sensor appears on the
display, and measurement is started. Each sensor is displayed as follows.
Sensor type Display
Speed sensor
S (Flash)
Speed/cadence (ISC) sensor
S / C (Flash simultaneously)
Cadence sensor
C (Flash)
Heart rate sensor
H (Flash)
Power sensor
P (Flash)
* The computer performs measurement using the GPS signal when the speed signal can-
not be received. In such a case, the computer changes to measurement using the sensor
whenever the speed signal is detected.
* When the cadence signal, heart rate signal, or power signal cannot be received, the rel-
evant measurement value is not displayed.
GPS
GPS (Global Positioning System) is a system to identify the current position on the earth by
receiving highly precise positional information sent from a satellite.
Receiving the GPS signal
• It may take several minutes to acquire the GPS signal after turning on the computer.
• While searching the GPS signal, we recommend that you do not move around until receiv-
ing the GPS signal. It may take more time to receive the GPS signal if you move around
while searching the GPS signal.
• Receiving the GPS signal becomes easier under such conditions that the sky is open and
the prospect for the satellites is good.
Where the GPS signal cannot be received
The unit may stop measurement or may not display appropriate measurements when the
GPS signal cannot be received in the following locations or environments.
• In a tunnel, underground and building, between high-rise buildings, under an elevated
structure and arcade, etc.
• In bad weather (snow, rain, etc.)
• Near a high-voltage line or a mobile telephone relay station.
• When the computer display does not face to the sky.
* The measurement results may differ slightly from the actual values, when the speed is
calculated based on the GPS signal.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cateye CC-GL51 Stealth evo plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cateye CC-GL51 Stealth evo plus in de taal/talen: Engels als bijlage per email.

De handleiding is 3,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Cateye CC-GL51 Stealth evo plus

Cateye CC-GL51 Stealth evo plus Gebruiksaanwijzing - Nederlands - 47 pagina's

Cateye CC-GL51 Stealth evo plus Gebruiksaanwijzing - Deutsch - 47 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info