469918
5
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
10
Setting of the
cars´ basic speed
1 – 10
1 – 10








The setting of the basic speed can be eected individually for one
and/or several cars. The cars which are to be adjusted have to be
positioned on the track. The setting can be carried out on 10 levels
with the 5 LEDs indicating the dierent levels by ashing or perma-
nent lighting.
1 LED lights = low speed
5 LEDs light = high speed
Switch on the Control Unit, place the cars to be adjusted on the
track and press “SPEED”
once. A certain number of LEDs will
now light, showing the speed level last used. Push the “SPEED”
button
as many times until you have reached the speed desired.
Conrm by pressing “ENTER/START”
. A short running light and
the lighting of the middle LED conrms completion of the setting,
g.
.
Setting of cars´
braking performance
1 – 10
1 – 10








(only for cars operated with speed controllers)
The setting of the braking performance can be eected individually
for one and/or several cars. The cars which are to be adjusted have
to be positioned on the track. The setting can be carried out on 10
levels with the 5 LEDs indicating the dierent levels by ashing or
permanent lighting.
1 LED lights = low braking eect
5 LEDs light = high braking eect
Switch on the Control Unit, place the cars to be adjusted on the
track and press “BRAKE”
once. A certain number of LEDs will
now light, showing the brake step last used. Push the “BRAKE” but-
ton
as many times until you have reached the braking perform-
ance desired. Conrm by pressing “ENTER/START”
. A short
running light and the lighting of the middle LED conrms completion
of the setting, g.
.
Setting fuel tank capacity
1 – 10
1 – 10








(only for cars operated with speed controllers)
The setting of the fuel tank capacity in combination with the Pit Lane
(30356) is eected for all cars simultaneously. The setting can be
carried out on 10 levels with the 5 LEDs indicating the dierent lev-
els by ashing or permanent lighting.
1 LED lights = low fuel capacity
5 LEDs light = full tank
Switch on the Control Unit, place the cars to be adjusted on the
track and activate the fuelling function by means of the slide switch
, g.
. Press the “FUEL” button
once. A certain number of
LEDs will now light, showing the fuel capacity last used. Push the
“FUELbutton
as many times until you have reached the fuel
capacity desired. Conrm by pressing “ENTER/START”
. A short
running light and the lighting of the middle LED conrms completion
of the setting, g
.

You can choose between 3 modes via the sliding switch
,
g.
:
OFF = cars don´t consume any “petrol”
ON = cars consume “petrol”
REAL = maximum speed depending on fuel tank capacity / cars
consume “petrol”) (only in combination with Pit Lane 30356 or Pit
Stop Lane 30346 and Pit Stop Adapter Unit 30361)
When driving in “REAL-mode” the car with a full tank is “heavier”,
drives slowlier and shows a lower braking eect; a car with an empty
tank is “lighter”, drives faster and shows a higher braking eect. The
current fuel tank capacity and the “fuel consumption” can only be
displayed in combination with the Driver Display 30353 and Pit Stop
30356.


Pit Lane 30356 Driver Display 30353

The car´s present tank capacity can be read via the bar display with
5 green and 2 red LEDs at the Driver Display. For refuelling drive
your car into the Pit Lane across the refuelling sensor g.
. The
bar display now starts to ash, g.
, and the car can be refuelled
by keeping the lane-change button pushed. g.
. The number of
refuellings are indicated by ashing or lighting of the yellow LEDs,
g.

(also see Driver Display).



Pit Lane 30356 Driver Display 30353


 


(only in combination with Pit Lane 30356 and Driver Display
30353)
Irrespective of the basic setting of the tank capacity it is possible
to individually set the tank capacity for one or several cars at the
race´s start for the number of laps till the rst pit stop. Push “START/
ENTER” once
; the 5 LEDs at the Control Unit will light perma-
nently, g.

, and the Driver Display´s bar display will ash, g.

.
Clicking the lane-change button at the corresponding speed control-
ler enables you to change the ll level, g.

.
Extended Pit Lane function
Pit Lane 30356







(only in combination with Pit Lane 30356)
It is possible to activate/deactivate the lap counting function in the
Pit Lane 30356 or Pit Stop Lane 30346 with the Pit Stop Adapter
Unit 30361. Switch o the Control Unit, keep “SPEED” button
)
pushed, switch on Control Unit and release “SPEED” button
.
By pushing the button again, 1 or 2 LEDs will light depending on
the setting.
LED 1 = lap counting function deactivated
LED 1 + 2 = lap counting function activated
Select the desired setting and push or drive a car across the Pit
Lane Sensor, g.
. The settings will now be adopted. Push
“START/ENTER”
for leaving the settings again.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Carrera Digital 124 - 30352 Control Unit bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Carrera Digital 124 - 30352 Control Unit in de taal/talen: Engels als bijlage per email.

De handleiding is 2,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info