469918
4
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
9
Connections
Control elements


Encoding/programming
of cars to the according
speed controllers




To encode a car place it on the track and swich on the Control
Unit.
Press “Code” button once
, g.
; the rst LED starts to light,
g.
. Then push lane-change-button once on the relevant speed
controller, g.
. In case the car is equipped with lights they will
start to ash and the Control Unit´s LEDs 2-4 will light successively.
Once encoding has been carried out the middle LED lights perma-
nently (g.
) and the car is allocated to the speed controller.
 This kind of encoding requires to have  on the
racetrack .
Encoding/programming
of Autonomous Car




300
150
250
200
0
100
50
SPEED
+
CLICK
Switch on the Control Unit, place the car to be encoded on the track
and press „Code“
twice, g.
. The rst two LEDs at the Con-
trol Unit start to light, g.
. Now push the lane-change button at
the speed controller, g.
; LEDs 3-5 will light successively. Wait
until the middle LED lights again, g.
. Activate the speed
controller´s tappet until the car has reached the desired speed. Now
push lane-change button again, g.
.
Autonomous Car´s encoding is completed now.
 This kind of encoding requires having   on the
track   . The programming of the Autono-
mous Car will be maintained unless the car is not being recoded.
The Autonomous Car is always displayed with address 7 in combi-
nation with the Position Tower.
Encoding/programming
Pace Car
Pit Lane 30356




300
150
250
200
0
100
50
SPEED
+
CLICK
(only in combination with Pit Stop Lane #30356)
Switch on the Control Unit, place the car to be encoded on the track
and press “Code″
three times, g.
. The rst three LEDs at
the Control Unit start to light, g.
. Now push the lane-change but-
ton at the speed controller, g.
; LEDs 2-5 will light successively.
Wait until the middle LED lights again, g.
. Activate the speed
controller´s tappet until the car has reached the desired speed. Now
push lane-change button again, g.
. The Pace Car´s encoding is
completed now and the car enters the Pit Stop Lane.
This kind of encoding requires having   on the
track . The programming of the Pace Car
will be maintained unless the car is not being recoded. The Pace
Car is always displayed with address 8 in combination with the Posi-
tion Tower.

After the Pace Car´s encoding has been completed it will auto-
matically enter the Pit Lane during the rst laps. In order to start the
Pace Car please push the button “Pace Car”
once. The LEDs
2 and 3 at the Control Unit will light and the Pace Car will leave the
Pit Lane. The Pace Car will now drive as long as the button „Pace
Car“ is pushed again. LED 2 stops lighting and the car automatically
enters the Pit Lane within the current lap.
Display of position
Autonomous and Pace Car


Position
Tower
30357





(only in combination with Position Tower #30357)
The position of the Autonomous Car (address 7) and of the Pace
Car (address 8) can be displayed at the Position Tower. This func-
tion can be activated at the Control Unit. Therefore switch o the
Control Unit and keep the “BRAKE” button
pushed, g.
,
switch on the racetrack and release the “BRAKE” button again. By
pushing the button again the function may be changed:
1 LED lights = no display
2 LEDs light = display at the Position Tower
Set the function requested and conrm your choice via “START/
ENTER”.
On/o switch
Switch for fuelling function
Button to start the race / acknowledge programming
Button for Pace Car / termination of programming
Button for setting basic speed
Button for setting braking performance
Button for setting fuel tank capacity
Programming button for cars

Some buttons are assigned with dierent tasks. In order to set a
function you need to use key combinations. Any programming steps
can be cancelled with button
“ESC/PACE CAR″. You will nd
further details in the course of this manual.
Connections (from left to right):
Connection for Lap Counter 30342
Connection for PC-Unit
Connector 1 for speed controller, speed controller extension set
or Wireless-Tower
Connector 2 for speed controller or second Wireless-Tower
Connector 3 for speed controller
Connector 4 for speed controller
Connection for DIGITAL 124 / DIGITAL 132 power supply

As far as a Wireless Tower is used, it will have to be plugged into
connector 1. Alternatively a second Wireless Tower can be plugged
into connector 2. In case only one Wireless Tower is used, connec-
tor 2 will have to be kept empty.
Additional wired speed controllers may be plugged into connectors
3 and 4. Please note that these will use address 5 and 6 then.
Using the speed controller extension set 30348 it has to be plugged
into connector 1. The cars´ addresses will be allocated as follows:
Speed controller extension set = address 1, 3 and 4
connector 2 = address 2
connector 3 = address 5
connector 4 = address 6
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Carrera Digital 124 - 30352 Control Unit bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Carrera Digital 124 - 30352 Control Unit in de taal/talen: Engels als bijlage per email.

De handleiding is 2,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info