8
SUPER RAPID button (C1 508)
Press the button to select or deselect this function.
Pressing this button reduces the time of the wash programme by a maximum of 50 minutes
depending on the programme and the temperature selected. The "Super Rapid" button can
be used for washing loads of 1 to 5 kg. This option may only be utilised on COTTONS and
SYNTHETICS programmes.
D
The option buttons should be selected before pressing
the "Start/Pause" button.
CREASE GUARD button (C1 105)
Press the button to select or deselect this function.
The Crease Guard function minimizes creases as much as possible with a uniquely designed
anti-crease system that is tailored to specific fabrics.
MIXED FABRICS - the water is gradually cooled throughout the final two rinses with no
spinning and then a delicate spin assures the maximum relaxation of the fabrics.
DELICATE FABRICS – final two rinses with no spinning and then the fabrics are left in water
until it is time to unload. When you are ready to unload, press the "Crease Guard" button –
this will drain.
WOOLLENS – after the final rinse the fabrics are left in water until it is time to unload and the
button indicator blinking.
When you are ready to unload, press the "Crease Guard" button, this will drain and spin
ready for emptying.
If you do not want to spin the clothes and activate drain only:
- Turn the programme selector to the "OFF" position;
- Select programme drain only ;
- Switch on the appliance again by pressing the "Start/Pause" button.
D
ACTIVA RINSE button (C1 508 - C1 105)
Press the button to select or deselect this function.
Thanks to the new electronic system, it is possible to effect a new special rinse cycle by using
this button. The addition of a lot more water and the new action combining of cycles of
rotation of the drum with loading and unloading of water, allow the laundry to be perfectly
rinsed.
This function has been designed for the people with delicate and sensitive skin, for which the
smallest residue of detergent can cause irritations or allergies.
It advisable to also use this function for the children’s items and in case of washings of very
dirty items, for which it is due to use a lot of detergent, or in the washing of towelling items
whose fibers mostly have the tendency to hold the detergent.
This option is not available on WOOLLENS programmes.
E
DELAY START button
Appliance start time can be set with this button, delaying the start by 3, 6 or 9 hours.
Proceed as follows to set a delayed start:
Select a programme (“STOP” indicator light blinks)
Press "Delay Start" button (each time the button is pressed the start will be delayed by 3, 6
or 9 hours respectively and the corresponding light will blink).
Press "Start/Pause" to commence the Delay Start operation (the indicator light associated
with the selected Delay Start time stops blinking and remains ON).
At the end of the required time delay the programme will start.
To cancel the Delay Start function:
press the "Delay Start" button until the indicator lights will be off (The "STOP" light blinks)
and the programme can be started manually using the "Start/Pause" button or switch off the
appliance by turning the programme selector to "OFF" position.
G
Warning: If there is any break in the power supply while
the machine is operating, a special memory stores the
selected programme and, when the power is restored, it
continues where it left off.
9
NO SPIN button (C1 508)
By pressing this button it is possible to eliminate the spin-drying on all programmes. This
operation is suitable for programmes at 90°C and at 60°C in case of special treated fabrics
(cottonova or permanent press) or for mixed delicate fabrics.
F
1000/400
SLOW SPIN button (C1 105)
This button reduces the spin speed to 400 r.p.m.
Note: this model is fitted with an electronic device that
checks the load is balanced correctly. If the load is
slightly unbalanced the machine will re-balance it
automatically to carry out the normal spin.
If, after several attempts, balance is not restored, a
reduced spin speed will be used.
If loads are seriously unbalanced the spin stage will be
cancelled.
This helps limit vibration, reduce noise output and
improve the washing machine’s lifespan.
F
