763814
16
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
16
Wired/Wireless connection
It is possible to connect your NP30 to your network via an available Ethernet
connection (RJ45) or via a Wi-Fi router. By default the unit is in AUTO mode, each
time you turn the unit it looks for the presence of a wired connection, and tries to
use this, if none is present or it cannot connect it then tries to use the wireless
connection and so on. In Auto mode once the NP30 has established a certain type
of connection to the network, then this type of connection will remain in use while
the NP30 is on.
You can alternatively configure the NP30 to permanently only use the wired or
wireless connection From the NP30’s ‘Network config’ menu, select ‘Wired/
Wireless’. This menu will present you with three options: ‘Auto’, ‘Wired Only’ and
‘Wireless Only’.
Selecting ‘Wired Only’ will cause the NP30 to reboot and then only use its Ethernet
connection to communicate with the network. Selecting the ‘Wireless Only’ will
cause the NP30 to reboot and only use its Wi-Fi connection. Selecting the ‘Auto’
option means the NP30 will try both and settle on the one it can make work as
described above.
Version
This menu item displays some hardware/software version numbers for your NP30.
Turn the rotary dial to scroll through the various items.
The Service Pack is the currently loaded firmware software. It’s a good idea to
note this down if you need to contact our technical support people as they may
request it.
The Serial Number and Product Code are not normally required by the technical
support team.
Note: This Serial Number is not the same as the physical serial number on the back
of the product itself.
Upgrade Firmware
Use this option to download new firmware for the NP30 from Cambridge Audio
over the Internet.
If you select this item the NP30 will contact our server and see if a newer version of
software is available (‘Checking for updates’ will be shown in the display).
If new software is found the NP30 will prompt you if you want to download it or not.
It is a good idea to update the firmware from time to time to take advantage of any
bug fixes or new features. At this stage, you can press the NP30’s button to
cancel the firmware upgrade. A Firmware upgrade may take several
minutes.
Note:
It is very important that once the Firmware upgrade has started you do not
switch off the power to the NP30 until the operation is complete otherwise the
NP30 may become permanently damaged.
Also do not interrupt the network or internet connection by removing the
Ethernet lead or switching off your router etc.
Language
Allows you to change the display language used.
A list of the currently supported languages will be shown. Select your preferred
one and press enter.
Note: The NP30 will then restart in order to start again in the new language, this
will take approximately 30 seconds.
Factory Reset
Puts all the settings back to their defaults as they were when they left the factory.
The NP30 will ask you if you are sure you want to proceed before performing a
reset.
Note: If you perform a factory reset, you will lose all your presets and any saved
WEP/WPA keys for your wireless network connection.
Register
This will display a key that can be used to register your NP30 on the Stream Magic
portal at www.stream-magic.com. First you will need to set up an account on
Stream Magic. Open www.stream-magic.com from your Internet browser. See the
section earlier on Stream Magic registration.
Note the generated key lasts for about 10 minutes, if you don’t use it in that time
you will need to exit and re-enter this menu to get a new key.
NP30 Name
This menu allows the setting of the declared UPnP Client name for your NP30.
This is the name other UPnP devices (such as control points and remote Apps etc.)
will display when they see the NP30.
The default name will be ‘NP30’ but can be changed to any name you can easily
recall such as ‘Dads NP30’ or ‘Kitchen’ etc.
Digital Pre-amp mode
The NP30 can optionally be used as a digital pre-amp and connected directly to a
suitable power-amp.
Before making this connection, access the NP30’s Digital Pre-amp Mode menu by
pressing the Home button then using the rotary dial to navigate to the Settings-
>Digital Pre-amp Mode submenu.
Press the rotary dial button to enter this submenu and use the rotary dial to select
On.
Finally confirm this setting by pressing the rotary dial again. Once Digital Pre-amp
mode is enabled, the handset Volume Up and Down buttons will affect the signal
output level from the NP30.
The level at both Digital and single-ended Phono/RCA outputs are affected and
either connection type can be used.
Be careful not to turn Digital Pre-amp mode off when connected to a power
amplifier in this way as this returns the output level to an un-adjustable maximum
level for use only into an integrated amplifier or pre-amplifier with its own volume
control.
Remote Code
There are two Options:
Option 1 – is the default and works with the NP30 remote control when also in its
default mode.
Option 2 – gives a secondary code set in cases where the remote codes are found
to clash with another remote handset.
If Option 2 is selected on the NP30 then the remote handset must also be set to
Option 2 remote codes as well as follows:
Press and hold down the button whilst inserting the batteries to switch to
Option 2.
By inserting the batteries without the button held down will default to Option1.
Auto Power-down
The NP30 will switch itself off after 15 minutes if it is not playing anything and
there has been no user interaction with it during this time. As a default this is set
to 15 minutes, but you can increase or decrease this time, or turn this feature off
altogether if desired.
The Auto Power Down setting can be found in Settings > Automatic Power Down.
There, using the rotary dial you can adjust APD from OFF to 1hr, in 5 minute
increments. Press the rotary dial to accept the new APD setting.
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cambridge Audio Sonate NP30 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cambridge Audio Sonate NP30 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Cambridge Audio Sonate NP30

Cambridge Audio Sonate NP30 Gebruiksaanwijzing - Nederlands - 17 pagina's

Cambridge Audio Sonate NP30 Gebruiksaanwijzing - Deutsch - 18 pagina's

Cambridge Audio Sonate NP30 Gebruiksaanwijzing - Français - 17 pagina's

Cambridge Audio Sonate NP30 Gebruiksaanwijzing - Italiano - 17 pagina's

Cambridge Audio Sonate NP30 Gebruiksaanwijzing - Espanõl - 17 pagina's

Cambridge Audio Sonate NP30 Gebruiksaanwijzing - Polski - 18 pagina's

Cambridge Audio Sonate NP30 Gebruiksaanwijzing - Svenska - 17 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info