763814
15
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
15
NP30
ENGLISH
Enter the network name
This option allows the NP30 to search for and connect to a particular network
name only.
Type your network name in using the alphanumeric entry screen.
If no matching network is found ‘Network not found’ will be displayed.
View Config
This menu firstly displays the IP mode (static or dynamic). This will be Auto/DHCP
(i.e. dynamic, this is the default) or alternatively Static IP.
For either mode by turning the Navigation/Select dial the NP30 will scroll through
the various current IP parameters, for instance the ESSID of the current wireless
network, Wired and Wireless MAC addresses, current IP address, (Sub)Netmask,
Gateway address etc.
Edit Config
This menu allows the selection of IP mode between static or dynamic (Auto/DHCP).
Auto/DHCP is recommended for most people in most circumstances. Static IP
requires quite a bit of knowledge about IP networks, and is for advanced users only.
The default setting is thus Auto / DHCP, here the NP30 obtains its IP address each
time you switch in on by a process called DHCP which means it is different each
time it is acquired. This process is completely automatic and much simpler than
implementing Static IP.
However sometimes it is useful (especially in large networks) to know the exact IP
address of each device, this can only be done by using static IP.
When using Static IP you will also need to enter the network mask you wish to
use and the addresses of your gateway and DNS service, note there is no way for
Cambridge Audio to know what these are in your network. Only select static IP if you
know exactly what you are doing!
To set static IP, select the ‘Settings > Network config > Edit Config’ menu and then
press SELECT.
The NP30 will now display ‘Auto (DHCP)? YES / NO’. Turn the NP30’s rotary dial to
select ‘NO’ and then press SELECT.
You will now be able to enter the fixed IP address you wish to give your NP30 by
using the rotary dial to select the desired numbers followed by pressing Navigation/
Select dial to end inputting the address.
The NP30 will now prompt you to enter the required network mask for the network.
You will be able to enter this in the same way as before for entering the IP address.
You will now need to enter the default gateway’s IP address used by the NP30 on
the network.
Finally, you will need to enter the DNS IP address for the NP30. On some networks,
you may need to enter your ISP’s DNS IP address, which should be available on your
ISP’s support page on their website.
After entering the above information, the NP30 will now try to connect to your
network. If you wish to use DHCP again simply select ‘Settings > Network config >
Edit Config’ and then set ‘Auto (DHCP)? YES / NO’ to ‘YES’.
Signal warning
The NP30 can display a warning if the Wi-Fi signal strength is low enough to be
causing reduced throughput.The options for the Signal Warning are simply Yes
or No.
Wi-Fi Region
Different parts of the world use slightly different frequencies for Wi-Fi. For best
performance you should set the NP30 to the region you live in, the current options
are US, Spain, Europe (i.e. other than Spain), Japan.
This menu contains various setup / configuration menus as shown below.
Settings
Network Config
Version
Upgrade Firmware
Language
Factory Reset
Register
NP30 Name
Digital Pre-amp Mode
Remote Code
Auto Power-down
Network Config
This menu enables you to set your NP30’s network settings, scan again for a
connection to another wireless network, or to manually configure the network
parameters. This is useful if you move your NP30 to a new location for instance.
By default the NP30 will be set for Automatic wired/wireless detection and automatic
IP addressing (DHCP) which will work without setup in most circumstances (for Wi-Fi
you will need to enter your WEP/WPA key if you have one).
In Auto mode the NP30 will look for a wired connection first and then scan for
wireless connections if it doesn’t find one. It will also try to obtain an IP address
automatically from your router/DHCP server.
If you wish to make changes to your setup the NP30 displays the following
submenus.
Network Config
Scan for networks
Enter network name
View Config
Edit Config
Signal Warning
WiFi Region
Wired/Wireless
Scan for networks
This option scans all available Wi-Fi frequencies for wireless networks and allows
you to connect to them.
The NP30 can connect to 802.11b/g or n networks (2.4GHz frequency range only
for n networks).
A list of available networks will be presented. If a particular network requires an
encryption key, a symbol will be seen at the end of the network name.
Select your local network using the Navigation/Select dial and press it in for enter.
The NP30 will then connect to the network using a saved key (if you have previously
set one) or present you with an alphanumeric entry menu. Here you can enter the
network key you set up when setting up your wireless network.
Select each character in turn using the Navigation/Select dial and then press or
navigate to the symbol and press Navigation/Select dial to enter that key. If you
make a mistake, press to go back one character.
The NP30 can handle keys in WEP, WPA and WPA2 formats (the choice of format is
made by appropriate settings on your router) and automatically generates the right
format from your text according to the router request.
Settings menu
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cambridge Audio Sonate NP30 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cambridge Audio Sonate NP30 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Cambridge Audio Sonate NP30

Cambridge Audio Sonate NP30 Gebruiksaanwijzing - Nederlands - 17 pagina's

Cambridge Audio Sonate NP30 Gebruiksaanwijzing - Deutsch - 18 pagina's

Cambridge Audio Sonate NP30 Gebruiksaanwijzing - Français - 17 pagina's

Cambridge Audio Sonate NP30 Gebruiksaanwijzing - Italiano - 17 pagina's

Cambridge Audio Sonate NP30 Gebruiksaanwijzing - Espanõl - 17 pagina's

Cambridge Audio Sonate NP30 Gebruiksaanwijzing - Polski - 18 pagina's

Cambridge Audio Sonate NP30 Gebruiksaanwijzing - Svenska - 17 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info