577809
16
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
16
Select your local network using the Navigation/Select dial and press it in for enter.
The Minx Xi will then connect to the network using a saved key (if you have
previously set one) or present you with an alphanumeric entry menu. Here you can
enter the network key you set up when setting up your wireless network.
Select each character in turn using the Navigation/Select dial and then press
or
navigate to the
symbol and press Navigation/Select dial to enter that key. If you
make a mistake, press
to go back one character.
The Minx Xi can handle keys in WEP, WPA and WPA2 formats (the choice of format
is made by appropriate settings on your router) and automatically generates the
right format from your text according to the router request.
Enter the network name
This option allows the Minx Xi to search for and connect to a particular network
name only.
Type your network name in using the alphanumeric entry screen.
If no matching network is found 'Network not found' will be displayed.
View Config
This menu rstly displays the IP mode (static or dynamic). This will be Auto/DHCP
(i.e. dynamic, this is the default) or alternatively Static IP.
For either mode by turning the Navigation/Select dial the Minx Xi will scroll through
the various current IP parameters, for instance the ESSID of the current wireless
network, Wired and Wireless MAC addresses, current IP address, (Sub)Netmask,
Gateway address etc.
Edit Config
This menu allows the selection of IP mode between static or dynamic (Auto/DHCP).
Auto/DHCP is recommended for most people in most circumstances. Static IP
requires quite a bit of knowledge about IP networks, and is for advanced users only.
The default setting is thus Auto/DHCP, here the Minx Xi obtains its IP address each
time you switch in on by a process called DHCP which means it is different each
time it is acquired. This process is completely automatic and much simpler than
implementing Static IP.
However sometimes it is useful (especially in large networks) to know the exact IP
address of each device, this can only be done by using static IP.
When using Static IP you will also need to enter the network mask you wish to
use and the addresses of your gateway and DNS service, note there is no way for
Cambridge Audio to know what these are in your network. Only select static IP if you
know exactly what you are doing!
To set static IP, select the 'Settings > Network cong > Edit Cong' menu and then
press SELECT.
The Minx Xi will now display 'Auto (DHCP)? YES / NO'. Turn the Minx Xi's rotary dial
to select 'NO' and then press SELECT.
This menu contains various setup / conguration menus as shown below.
Settings
Audio Settings
Network Cong
Version
Upgrade Firmware
Language
Factory Reset
Register
Device Name
Idle Mode
Auto Power-down
Edit Audio Input Names
Audio Settings
Adjustments to the bass, treble and balance level can be made as follows:
Press and hold the
button to get to the top menu. Go to 'Settings - > Audio
Settings' and then press Select to bring up the Tone Control and Balance menu
items.
Select 'Tone Control' to adjust bass and treble output level. Select the desired
output level using the rotary dial and then press the Minx Xi's
button to go back
to the previous menu items.
Select 'Balance' to adjust the Left and Right balance output level. Select the
desired balance level using the rotary dial and then press the Minx Xi's
button to
go back to the Audio Settings menu.
Network Config
This menu enables you to set your Minx Xi's network settings, scan again for a
connection to another wireless network, or to manually congure the network
parameters. This is useful if you move your Minx Xi to a new location for instance.
By default the Minx Xi will be set for Automatic wired/wireless detection
and automatic IP addressing (DHCP) which will work without setup in most
circumstances (for Wi-Fi you will need to enter your WEP/WPA key if you have one).
In Auto mode the Minx Xi will look for a wired connection rst and then scan for
wireless connections if it doesn't nd one. It will also try to obtain an IP address
automatically from your router/DHCP server.
If you wish to make changes to your setup the Minx Xi displays the following
submenus.
Network Cong
Scan for networks
Enter network name
View Cong
Edit Cong
Signal Warning
WiFi Region
Wired/Wireless
Scan for networks
This option scans all available Wi-Fi frequencies for wireless networks and allows
you to connect to them.
The Minx Xi can connect to 802.11b/g or n networks (2.4GHz frequency range only
for n networks).
A list of available networks will be presented. If a particular network requires an
encryption key, a
symbol will be seen at the end of the network name.
Settings menu
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cambridge Audio Minx Xi bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cambridge Audio Minx Xi in de taal/talen: Engels als bijlage per email.

De handleiding is 6,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Cambridge Audio Minx Xi

Cambridge Audio Minx Xi Gebruiksaanwijzing - Nederlands - 20 pagina's

Cambridge Audio Minx Xi Gebruiksaanwijzing - Deutsch - 20 pagina's

Cambridge Audio Minx Xi Gebruiksaanwijzing - Français - 20 pagina's

Cambridge Audio Minx Xi Gebruiksaanwijzing - Italiano - 20 pagina's

Cambridge Audio Minx Xi Gebruiksaanwijzing - Espanõl - 20 pagina's

Cambridge Audio Minx Xi Gebruiksaanwijzing - Polski - 20 pagina's

Cambridge Audio Minx Xi Gebruiksaanwijzing - Svenska - 20 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info