656773
8
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
1
Standby/On button
Controls the standby state of the unit. When the top panel Standby/On button on
the unit itself is illuminated red, the system is in its <0.5W standby state. When
the button is illuminated white the unit is on and ready for playback. When the unit
is rst turned on it takes approximately 20 seconds to fully power up and become
active. During this phase the top panel button will blink red on and off .
2
Volume buttons
Volume up is labelled ‘+’, volume down is labelled ‘-’.
3
Mute button
Press to mute and press again to un-mute the unit.
4
X Button
Stops streaming playback (and returns the unit to the analogue inputs).
Starting up streaming playback from Bluetooth, Airplay or Internet Radio will always
cause the Minx Air to automatically switch back to that source. Otherwise the
system defaults to the analogue inputs.
To stop Bluetooth, Airplay or Internet Radio playback and return to the analogue
inputs just press the X button. Press a second time to mute the analogue input.
5
Pairing button
Used to pair (connect to) Bluetooth devices so that they can be played back
wirelessly. When the pair button is pressed the pair button on the top panel of the
unit will blink blue for approximately 30 seconds. This indicates that the system is
in pairing mode. See later section.
6
Presets buttons 1 – 10
Press to recall an Internet Radio preset. As shipped from the factory 10 stations will
have been pre-assigned, 5 can be accessed from the top panel buttons, all 10 can
be accessed via the remote. To change the assigned stations use the free Minx Air
App for Android or Apple devices, see later section.
7
Bass controls
Allows setting of the bass/low frequency response of the unit tailored to your taste
and the acoustics of your room.
Bass up is labelled ‘+’ and bass down is labelled ‘–’.
Getting startedRemote control
For help connecting Minx Air to your Wi-Fi network, we recommend watching the
help videos available at http://www.cambridgaudio.com/MinxAirSupport. Also
please see the Wi-Fi setup guide supplied with your unit.
Note: If you make a mistake during the connection process, reset the Minx Air. To
do this, press and hold the Standby/On button and WPS button on the rear panel
for 10-15 seconds until the Minx Air switches off, then repeat the connection
process.
Network connections
Before you can use your Minx Air for iRadio/Streaming you must have the following:
A broadband internet connection (such as ADSL) to a suitable internet service
provider (ISP).
A network connection either wirelessly via 802.11b/g or n Wi-Fi or wired Ethernet
connection (10 or 100 M bits/sec via an RJ45 connection).
In many cases the broadband modem, router and wireless access point will be a
single combined unit supplied by your Internet Service Provider or bought from a
computer store.
If your wireless network is congured to use Wired Equivalent Privacy (WEP) or Wi-Fi
Protected Access (WPA) data encryption then you will need to know your WEP or WPA
key so you can get the Minx Air to communicate with the network.
IMPORTANT:
Before you continue, make sure that your wireless access point or router is
powered up and working with your broadband internet service (use your computer
to verify this). To get this part of the system working you must read the instructions
supplied with the wireless access point or router.
The Minx Air can be congured to connect to a Wired or Wireless network.
For wired setup, see later section 'Connecting to a wired network'.
Connecting to a wireless network
1. Connect the Minx Air to the mains power and press the button on top of the
unit. Wait for up to 20 seconds for the ashing light on the rear panel to ash
green
and orange . If the light does not ash green and orange after 20
seconds, please carry out a factory reset as detailed above, and start again.
2. Go to your computer/tablet and click on the wi-/network logo and select Minx
Air_XXX.
Mac
PC
12
3 4 5
7
6
8
8

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Cambridge-Audio-MINX-AIR-200

Zoeken resetten

  • Krijg het niet voor elkaar mijn minx 100 op het wifinetwerk te krijgen wel geluid via Bluetooth. Wat doe ik verkeerd?
    Gesteld op 8-2-2021 om 23:33

    Reageer op deze vraag Misbruik melden
  • mijn mini 200 is verbonden met wifi en bleutooth maar geeft geen geluid na resetten ook niet er komt gewoon geen geluid uit wat te doen? Gesteld op 13-4-2020 om 14:11

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cambridge Audio MINX AIR 200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cambridge Audio MINX AIR 200 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Cambridge Audio MINX AIR 200

Cambridge Audio MINX AIR 200 Snelstart handleiding - Nederlands - 2 pagina's

Cambridge Audio MINX AIR 200 Snelstart handleiding - Deutsch - 2 pagina's

Cambridge Audio MINX AIR 200 Snelstart handleiding - English - 2 pagina's

Cambridge Audio MINX AIR 200 Snelstart handleiding - Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info