656765
8
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
8
1
Standby/On button
Controls the standby state of the unit. When the LED is illuminated
red, the system is in its low power standby state. When the unit is
rst turned on it takes approximately 20 seconds to fully power up
and become active. During this phase the LED will blink red on and
o .
2
Volume buttons
Controls the player's volume.
3
Mute button
Press to mute and press again to un-mute the unit.
4
AUX Button
Selects AUX/MP3 inputs. Pressing this button will toggle between
Aux and MP3 inputs.
5
Bluetooth button (Pairing)
Used to pair (connect to) Bluetooth devices so that they can be
played back wirelessly. When the button is pressed the LED on the
unit will blink blue for approximately 30 seconds. This indicates that
the system is in pairing mode. See later section.
6
Presets buttons 1 – 10
Press to recall an internet radio preset. As shipped from the factory
10 stations will have been pre-assigned, 5 can be accessed from
the top panel buttons, all 10 can be accessed via the remote. To
change the assigned stations use the free Air App for Android or
Apple devices, see later section.
7
Bass controls
Allows setting of the bass/low frequency response of the unit tailored
to your taste and the acoustics of your room.
Getting started
1
4
Bass +
5
8
6
32
7
10
9
Remote control
Note: If you make a mistake during the connection process, reset
the Air. To do this, press and hold the Standby/On button and WPS
button on the rear panel for 10-15 seconds until the Air switches o,
then repeat the connection process.
Network connections
Before you can use your Air for Internet Radio/Streaming you must
have the following:
A broadband internet connection (such as ADSL) to a suitable
internet service provider (ISP).
A network connection either wirelessly via 802.11b/g or n Wi-Fi
or wired Ethernet connection (10 or 100 M bits/sec via an RJ45
connection).
If your wireless network is congured to use Wired Equivalent Privacy
(WEP) or Wi-Fi Protected Access (WPA) data encryption then you
will need to know your WEP or WPA key so you can get the Air to
communicate with the network.
IMPORTANT:
Before you continue, make sure that your wireless access point
or router is powered up and working with your broadband internet
service (use your computer to verify this). To get this part of the
system working you must read the instructions supplied with the
wireless access point or router.
The Air can be congured to connect to a wired or wireless network.
For wired setup, see later section 'Connecting to a wired network'.
Connecting to a wireless network
1. Connect the Air to the mains power and press the button on
top of the unit. Wait for up to 20 seconds for the ashing light on
the rear panel to ash green
and orange . If the light does
not ash green and orange after 20 seconds, please carry out a
factory reset as detailed above, and start again.
Apple Wireless Accessory Conguration
If you have an Apple mobile device, go to the 'Settings -> Wi-Fi'
menu. Choose the Air showing under 'Set up New AirPlay Speaker'
and follow the instructions.
Note: For Mac with OS X, once connected the setup will then
proceed to Airport utility. Follow the instructions.
Otherwise, proceed to the next section.
12
3 4 5
7
6
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cambridge Audio Air 100 V2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cambridge Audio Air 100 V2 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Cambridge Audio Air 100 V2

Cambridge Audio Air 100 V2 Gebruiksaanwijzing - Deutsch - 13 pagina's

Cambridge Audio Air 100 V2 Snelstart handleiding - English - 2 pagina's

Cambridge Audio Air 100 V2 Gebruiksaanwijzing - Français - 13 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info