607733
33
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
3336
Installation and handling of the components
Step 1:
Step 2:
Step 3:
Step 4:
CV 9011-Step 5:
First of all, please choose the most convenient position for the monitor and the installation pad
in your vehicle by attaching the monitor to the padand checking different positions in the
vehicle. It is very important to observe impact areas for occupants(amongst others the airbag
zone), surface consistency (depending on the type of fastening), free sight to the monitor (no
impaired sight out of the windshield), removability of the monitor from the installation padaswell
as to aconvenient possibility for placing the cable.
After having found asuitable position for the monitor in the vehicle you can mount /attach the
installation padaccordingly.Please use the enclosed cleaning cloth for degreasing the
surfaces you want to attach the retainer to. Please note that in case of high variations in
temperature -depending on the structure and the features -decolorizations of the surfaces can
occur during the subsequent utilization.
Connect the microphone to the leftside of the monitor.Ifpossible, please pass the cable in a
way that it does not lie or hang about unfastened in the vehicle and that it may not influence the
conducting of the vehicle.
When passing the cable, please take care that it is not under traction stress but that it has some
tolerance. Avoid crushing the cable as damages of the insulation can be caused by
friction/rubbing.
Depending from the vehicle type and itsequipment (e.g. airbags), it is reasonable to install the
microphone either at the A-pillar,atthe sun shield or at the roof interior.For details about the
equipment features please refer to the documentsofthe vehicle. Please also observe the notes
on distances to other componentsand to the driver /speaker,asspecified in the installation
manual.
Insert the cigarette lighter plug in the cigarette lighter jack in order to establish the power supply.
If possible, please pass the cable in away that it does not lie or hang about unfastened in the
vehicle and that it may not influence the conducting of the vehicle.
Install the steering wheel remote control (SWRC) as described in the mounting guidelines. In
delivery status the SWRC control is not paired with the hands-free car kit. Please call the sub-
menu 'Remote control pairing' (by pressing key 1and pressing key 6four times) at the hands-
free car kit. When pressing key 2amessage appears which recommends pressing keys 7and 3
on the SWRC simultaneously.Proceed for at least 3seconds. The SWRC is now paired with the
HFCK and ready for use. By pressing key 5twice (or the call termination key on the SWRC) you
return to the main mask.
Under the sub-item 'SW-Version' the version number of the currently uploaded system software
is displayed.
The language of the menu navigation can be changed under the sub-item 'Language'. Several
languages are at your disposal there. If you operate the hands-free set for the first time, the
preset menu language is English. In order to change the menu language, please perform the
following steps:
Please press key 1once and then consecutively key 6until the menu item "language" is
displayed. Then press key 2once to access the submenu. The current menu language will then
be displayed. By pressing key 6several times you can now scroll to the language you want to
use in future. Youcan scroll back by pressing key 1. If you want to select alanguage, please
press key 2. By pressing key 5several times you return to the main mask.
In order to be able to use the voice dialing functions of your mobile phone with the hands-free
set, you must correspondingly have identified the phone number in your mobile phone in
advance. In most cases you can only include voice tags in the directory of your mobile phone for
phone numbers already stored. In order to call up the voice tagfunction at the hands-free set
please press key 2inthe main mask for 3seconds. Please announce now the call identity of the
desired partner.
(1) =Entering into the menu
(6) =Connecting to the mobile phone connected last
Other keys =nofunction
(1) =Entering into the menu
(2) =Calling up the list of numbers dialed
(3/4) =Volume control key =volume turn up/down
Please note: The volume adjustment of the mobile phone is adopted by the hands-free
set. If e.g. the option "silent" is activated (all acoustic signals are deactivated), no call
signal is heard from the loudspeakers of the hands-free set. It depends on the paired
mobile phone whether the HFCK issues acall sign. In addition, the volume of some
mobile phones should not been switched to maximum in order to avoid echo problems
at the hands-free car kit.
(5) =nofunction
(6) =Input of phone numbers
The middle and the lower line indicate the phone number entered (max. 30 characters).
(1) =Deletion of the last cipher
(2) =Dialing number
(3) =Count down last cipher
(4) =Count up last cipher
(5) =Exit menu
(6) =Entering the next cipher
Use of voice tags:
Functions of the keys (x) during operation by pressing shortly:
No mobile phone is connected, stand-by:
Amobile phone is connected, no call/menu is active:
Amobile phone is connected, input of phone numbers:
33

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bury Comfort Vision 9010 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bury Comfort Vision 9010 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools als bijlage per email.

De handleiding is 1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info