497312
27
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
Page 24 of 44 pages
DVD7200BT ENGLISH
AUX IN
The AUX IN (brown connection cable) is a connection with which you can connect external
audio devices through their headphone or AUX output with this device. The audio tracks
played back on these devices are then put out through the car speakers. This is how you can
e.g. play back audio files that you have saved on your cell phone, minidisk, iPod® or tape
recorder. To connect external audio devices with the CD/DVD car radio, you will need a
cable with an RCA jack (right + left) on a 3.5 mm jack plug, which is not included in the scope
of delivery. First connect this cable to the device - and then the headphone connection or
AUX output of your playback device. Now you can start the playback. Set the volume of the
playback device to a medium level and subsequently regulate the volume with your
DVD7200BT. If the playback source of the DVD7200BT has not been set to AUX yet, please
press the “MODE” button until AUX appears on the display.
Menu settings level 1
By briefly pressing the volume control dial once or several times, the functions of menu level
1, volume control, bass setting, treble setting, and the speaker balance between the left and
right as well as front and rear speaker groups can be selected and set.
Changing the bass settings (BASS)
Pressing the volume control dial twice will result in reaching the bass settings. The message
“BAS” will appear on the display together with the current level (e.g. B. “+2”). To change the
bass bandwidth, turn the volume control dial clockwise or counter-clockwise. The bandwidth
can be set in a range between “-7” and “+7”. It can be changed in increments of one. The
setting is saved either when the desired value is confirmed by pressing the volume control
dial or through automatic memory (don’t change anything on the device for approx. five
seconds). If you confirm the selection by pressing the control dial , you will reach the next
possible setting. If you use the automatic memory, the device will return to the standard
display.
Changing the treble settings (TREBLE)
After pressing the volume control dial twice, the treble setting (TREBLE) can be reached.
The message “TRE” will appear on the display together with the current level (e.g. “0”). To
change the bandwidth of the treble, turn the control dial clockwise or counter-clockwise. The
bandwidth can be set in a range between “-7” and “+7”. It can be changed in increments of
one. The setting is saved either when the desired value is confirmed by pressing the volume
control dial or through automatic storage (don’t change anything on the device for approx.
five seconds). If you confirm the selection by pressing the volume control dial, you will reach
the next possible setting. If you use the automatic memory, the device will return to the
standard display.
Changing the volume ratio (BALANCE)
After pressing the volume control dial three times, the settings for the ratio between the
speakers connected on the right and left can be reached (BALANCE). The message “BAL”
appears on the display along with the settings for the volume ratio between the right and left
speaker group (e.g. “BAL R2”). To change the ratio between the speakers, turn the volume
control dial clockwise or counter-clockwise. Depending on the direction in which the control
dial is turned, an “R” (right speaker group) or an “L” (left speaker group) will appear on the
display, together with a digit (e.g. “R2” or “L4”). These provide information about the direction
in which the volume ratio is changed and about the amount of the change. The ratio between
the right and left speaker group can be set in a range between “8R” and “8L”. The volume
ratio between the speakers changes according to the setting and the volume will increase on
one side according to this setting and decrease on the other side. If the ratio is set to “R-L”,
the volume on both speaker groups is the same. If the control dial is set to the maximum
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bullit DVD7200BT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bullit DVD7200BT in de taal/talen: Engels als bijlage per email.

De handleiding is 1,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info