544010
22
Verklein
Vergroot
Pagina terug
1/290
Pagina verder
22 | English
1 609 92A 0MW | (28.2.14) Bosch Power Tools
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 28.02.2014
Assembly
Before any work on the machine itself, pull the mains
plug.
Ensure that the spray gun and base unit are assembled
completely and with all seals. Only this will ensure the
function and safety of the fine-spray system.
Connecting the Air Hose (see figures A1 A3)
–Open the holding clamp 24 and unwind the air hose 20
completely from the base unit 22.
Connecting the base unit:
Insert a bayonet lock 21 of the air hose securely into the
slots in the base unit port 26 according to the arrow marks.
Turn the bayonet lock a quarter turn clockwise.
Connecting to the spray gun:
Insert the second bayonet lock 21 of the air hose securely
into the slots in the spray gun port 9 according to the arrow
marks.
Turn the bayonet lock a quarter turn clockwise.
Note: Remove the air hose 20 before pouring in spray materi-
al (quarter turn of the bayonet lock 21 counterclockwise; pull
the bayonet lock 21 out of the port 9).
Changing the Nozzle Cap (see figures B1B2)
The fine-spray system is supplied with three nozzle caps:
Note: Check the spray material by stirring it before selecting
the nozzle cap. Thinner-viscosity material (e.g. wood paint)
can be sprayed better with the grey nozzle cap 11 or the black
nozzle cap 12, whereas thicker-viscosity material (e.g. wall
paint) can be sprayed better with the white nozzle cap 10.
To change the nozzle cap, unscrew the union nut 3.
Pull off the air cap 2.
Unscrew the mounted nozzle cap.
–Open the holding clamp 24 and take the required nozzle
cap out of the accessory compartment 27.
Screw the required nozzle cap onto the thread in the spray
gun.
–Put the air cap 2 on the nozzle cap and tighten it with the
union nut 3.
Operation
Before any work on the machine itself, pull the mains
plug.
Preparing for Operation
Spraying on the sides of water bodies (lakes, rivers,
etc.) or neighbouring surfaces in the direct catchment
area is not permitted.
When purchasing paint, varnish and spray material, pay at-
tention to their environmental compatibility.
Preparing the Spray Surface
The spray surface must be clean, dry and grease-free.
Roughen smooth surfaces and then remove the sanding
dust.
When spraying, all non-covered surfaces can be soiled by the
spray mist. Therefore, thoroughly prepare the area around
the surface to be sprayed:
Cover or mask off floors, furnishings, doors, windows as
well as door and window frames, etc.
Preparing the Spray Material
Stir the spray material thoroughly.
Dilute the spray material if necessary.
When diluting, pay attention that the spray material
and the diluting agent correspond. When using a faulty
diluting agent, lumps can develop that can lead to clogging
of the spray gun.
When diluting the spray material, make sure that the
flash point of the mixture is above 55 °C again after di-
luting. Diluting e.g. solvent-based lacquers lowers the
flash point.
Filling in Spray Material (see figures C1C2)
Note: Remove the air hose 20 before pouring in spray materi-
al (quarter turn of the bayonet lock 21 counterclockwise; pull
the bayonet lock 21 out of the port 9).
When using large buckets, pour the spray material into a
smaller transfer bucket 14 if necessary (e.g. 10-l wall paint
into an empty 2.5 or 5.0-l bucket).
Pull the spray gun off the container 7.
If you are using already opened spray material, place the
thoroughly cleaned filling sieve 13 on the container 7 to
hold back any lumps of paint when pouring in.
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Nozzle
cap 10
Nozzle
cap 11
Nozzle
cap 12
Colour white grey black
Delivery
condition
Mounted In the accessory compartment
27 under the holding clamp 24
Application “Wall” “Wood/glaze” “Wood/lacquer”
Spray material Recommended
dilution
Wood stains, oils, glazes, impregna-
tions, anti-rust primers
0%
Solvent-dilutable or water-dilutable
lacquers, primers, radiator lacquers,
thick-coat glazes
0–5%
Emulsion paint, latex paint 05 %
Hold the spray gun in place with one hand and use
the other hand to turn the container 7 towards the
open symbol.
OBJ_BUCH-2026-002.book Page 22 Friday, February 28, 2014 11:28 AM
22

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Bosch-PFS-5000-E

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch PFS 5000 E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch PFS 5000 E in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 59,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info