555443
5
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
Heatronic 40007738003455 (2014/04) 5 of 60
Maximum Modulation -----------------------------------------------
The Maximum Modulation is the highest signal the control
can send to modulate the boiler. For boilers with electronic
operators, the boiler’s input signal range may not match the
output signal range of the Heatronic 4000. Use the MAX MOD
setting in the Source (#) Menu to select an appropriate boiler
maximum modulation.
For 0 to 10 V (dc):
Maximum Modulation =
Boiler’s Maximum Input Signal
x 100%
10 V (dc)
For 4 to 20 mA:
Maximum Modulation =
Boiler’s Maximum Input Signal - 4mA
x 100%
16 mA
Example:
A boiler’s input signal range is 0 to 9 V (dc). The Heatronic
4000 control has an output signal range of 0 to 10 V (dc).
Maximum Modulation = 9 V x 100% = 90%
10 V
Control’s
Output
Signal
Range
Boiler’s
Input
Signal
Range
100%
10 V (dc)
9 V (dc)
0 V (dc)0 V (dc)
90%
Boiler’s
Maximum
Input
Signal
Maximum
Modulation
0%
EMS Signal Minimum
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
The EMS Signal Minimum is applicable for EMS temperature
type boilers that operate based on a 0-10 Vdc analog input
signal. This setting is to be set to the appropriate signal that
is defined by the boiler’s ignition control. This analog value
corresponds to the temperature value set with the EMS
Temperature Minimum setting.
EMS Temperature Minimum
----------------------
The EMS Temperature Minimum is applicable for EMS temperature
type boilers that interpret an analog value as a temperature.
This setting is to be set to the appropriate temperature that
is defined by the boiler’s ignition control. For a 0-10 Vdc EMS
boiler, this temperature value corresponds to the value set with
the Vdc Signal Minimum setting. For a 4-20 mA EMS boiler,
this temperature value corresponds to 4 mA.
EMS Temperature Maximum
- - - - - - - - - - - - - - - - - - - - - -
The EMS Temperature Maximum is applicable for EMS
temperature type boilers that interpret an analog value as
a temperature. This setting is to be set to the appropriate
temperature that is defined by the boiler’s ignition control. For
a 0-10 Vdc EMS boiler, this temperature value corresponds
to 10 Vdc. For a 4-20 mA EMS boiler, this temperature value
corresponds to 20 mA.
Maximum Boiler Outlet
- - - -- - - - - -- - - - - - -- - - - - -- - --
The control has the capability for each boiler outlet tempera-
ture to be monitored & limited. The MAX OUT setting sets
the maximum boiler outlet temperature. If the boiler outlet
temperature reaches the boiler outlet maximum, the boiler
is turned off. In order for the boiler to be able to be turned
on again, the boiler outlet temperature must drop 10°F (6°C)
below the boiler outlet maximum.
If MAX OUT is set to OFF, the control only monitors the boiler
outlet temperature.
Boiler Pump Post Purge - - - - - - - - - - - - - - - - - - - - - - - - - - --------------
This setting sets the amount of time the control operates the
boiler pump after the boiler is turned off. This will purge heat out
of the boiler, reducing stand-by losses, & also aid in reducing
“kettling”. The amount of time for the boiler pump post purge
is adjustable between 10 seconds & 20:00 minutes. Auto is
also available in which the control automatically determines
the amount of time based on the boiler mass.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch Heatronic 4000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch Heatronic 4000 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Bosch Heatronic 4000

Bosch Heatronic 4000 Gebruiksaanwijzing - Français - 60 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info