581463
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
QUICK REFERENCE GUIDE
GB
Start/cancel button
You use this button to start the selected program; the light on the
button lights up.
Stop the program with the start/cancel button if you would like to
open the door once the dishwasher’s washing program is running.
LED progress indicator lights
The program sequence throughout the
washing process can be monitored from the
progress indicator lights on the control panel.
Warning!
Following the washing stage, in order to drain
and remove water from inside the machine completely, the machine
will pause for approximately 35 minutes. Do not worry this is not a
fault. Then End progress indicator light will come on.
Warning!
Do not switch the machine off before End light comes on.
How to cancel the washing program
Press start/cancel button for 3 seconds. The indicator light will start
flashing. The machine will drain the water inside the machine for
45 seconds. The programme is cancelled when start/stop indicator
light goes off. Then, you can choose and start a new programme.
Important:!
Depending on the stage of the program you have cancelled, there
may be detergent residue or rinse aid inside the machine and
on the load. Make sure the items in the dishwasher are not used
before washing properly.
How to change the washing programme
To change a running programme, press the start/cancel button: The
programme light turns off.
Select a new programme and start it with the start/cancel button:
The respective programme light lights up.
Important:!
The new program will NOT start right from the beginning. It will start
from the stage last carried out by the previous program selection.
On/off button
You turn your dishwasher on / off with this button. When turning on,
the indicator light for the last used programme will light up.
Salt level indicator light
When this indicator light comes on, you must
refill special salt (If applicable).
In machines which do not possess an electrical
salt indicator, the salt content can be read on
the container for the salt. When the visual fill
indicator is dark, there is enough salt in the
container.
When the colour is light, open the container and add dishwasher
salt.
Rinse aid level indicator light
If this indicator light comes on, you have to refill
rinse aid (If applicable).
You can also tell whether rinse aid must be
refilled by looking at the rinse aid dispenser.
When the visual fill indicator is dark, there is
enough rinse aid in the dispenser.
When the colour is light, open the dispenser and
refill rinse aid.
Program selection button
Use the programme selection button to select the desired
programme. The corresponding programme light lights up.
Improper Loading Of Dishware




17 7781 01 00_AB
Visual Indicator
Visual Indicator
Wash
Rinse
Dry
End
Combi Tablet Button
Allows to obtain a better drying performance from the multi-purpose
detergents called as all in one detergents such as 2in1, 3in1, 4in1,
5in1 and etc., depending on the hardness level of the tap water. The
programs in which the Combi Tablet function can be enabled are
indicated in the Program Data and Table of Average Consumption
Values. Combi Tablet symbol lights up when you select the Combi
Tablet function.
Rinse aid level indicator light
Salt level indicator light
LED progress indicator lights
Programme indicator lights
1
2
3
4
5
Start/Cancel button
6
Programme selection button
7
Combi Tablet button
8
9
10
On/Off button
Time Delay indicator lights
Time Delay button
Time delay
With the delay function of your machine, you may delay the starting
time of the program up to 3-6-9 hours using the Time delay button.
3-6-9 hour lamps will start flashing respectively, each time you
press the delay button. If you press the Start/Cancel button while
the desired delay lamp is flashing, then the delay lamp comes
on constantly and the function is saved to the memory. As of this
moment, the countdown starts. Upon completion of the delay
period, the delay lamp will go off and the selected washing program
will start.
If you press the Delay Button when the 9 hours delay lamp is
flashing, then the delay lamps goes off. If you press the Start/
Cancel button when the Delay Lamps are not lit, then the selected
program will start without any delay.
You may follow the remaining delay period from the delay lamps.
For example: If you select the 9 hours delay option, then the 6
hours lamp will come on when there is 6 hours remaining to the
start of washing program and 3 hours lamp will come on when there
is 3 hours remaining.
Changing the delay period
Press Start/Cancel button. The Delay period lamp will start flashing.
You may choose the new delay time by pressing the delay button
again.
Press Start/Cancel button again to save the setting.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Blomberg GIN 9260 E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Blomberg GIN 9260 E in de taal/talen: Engels als bijlage per email.

De handleiding is 0,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Blomberg GIN 9260 E

Blomberg GIN 9260 E Gebruiksaanwijzing - English - 33 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info