531189
11
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
11
Adjusting the length of the tube (fig. I)
The extension tube (8) can be adjusted in 21 steps.
Engage the adjustment knob (25) and slide the tube to the
desired length.
Release the knob.
Adjusting the suction head (fig. G)
For vacuuming on carpets, switch the floor surface
selector (26) into the up position.
For vacuuming on laminates, tiles, etc., switch the floor
surface selector into the down position.
Switching on and off (fig. A)
The on/off switch (1) can be operated by hand or foot.
To switch the appliance on, press the on/off switch (1).
To switch the appliance off, press the on/off switch again.
VB1630/VB1740/VB1820/VB1850/VB2050 -
Setting the suction force (fig. A)
The speed control switch (2) allows for a precise setting of the
suction force.
Slide the speed control switch (2) to the desired setting.
For vacuuming on hard surfaces (e.g. floors), choose a
high speed setting.
For vacuuming on soft surfaces (e.g. upholstery), choose a
low speed setting.
Adjusting the airflow (fig. A)
Move the airflow control switch (7) to adjust the airflow
as desired.
Vacuuming
When operating the appliance, make sure that the hose is
not trapped, twisted or blocked.
In case of overheating, a cut-out will operate and the
appliance will automatically stop.
If the appliance stops operating, unplug the appliance and
allow it to cool for 2-3 hours.
Hints for optimum use
When working in confined spaces, temporarily remove the
accessory holder from the tube to improve your scope.
When vacuuming stairs, always start at the bottom and
work your way up. Position the appliance on the floor and
do the stairs until halfway. Then carry the appliance to a
stable position which is at least one stair below your
working position, and do the top half of the stairs.
VB2050 - Using the turbo brush
Take care that the speed control switch is at the highest
setting. Move the slider on top of the brush as necessary
to optimise the suction force.
Move the brush steadily back and forth. Do not keep the
brush on the same place for a long time, as this might
damage the surface.
Carrying the appliance (fig. J)
During use the appliance can be carried using the handle (4).
Tilt the handle into position as shown.
Temporarily parking the suction head (fig. K)
Use the park position (27) for a temporary parking of the
suction head.
Storing the appliance (fig. L)
Warning! When storing the appliance, switch the appliance
off and unplug it.
Make sure that the cord is fully rewound.
Place the appliance in an upright position.
Park the tube by placing the ridges on the head and the
tube in the corresponding slots on the appliance as
shown. The locking device (28) engages automatically.
Store the appliance in a dry location. The appliance can
be carried at the integrated handle (29).
To take the tube from the appliance for use, press one of
the lock buttons and lift the tube and head out of the
parking slots.
Maintenance
Your Black & Decker appliance has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
appliance care and regular cleaning.
Warning! Before performing any maintenance or cleaning on
the appliance, unplug the appliance.
Regularly clean the ventilation slots in your appliance
using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
VB2050 - Clearing the turbo brush (fig. M)
Remove any hair or threads collected onto the brush (30).
Use a pair of scissors if necessary.
Remove the cover (31) to remove any foreign objects
blocking the air turbine (32). Re-fit the cover.
Replacing the dustbag (fig. C & D)
The dustbag must be replaced when the red bag full indicator
(14) is visible while the appliance runs at maximum speed and
the head is raised from the surface. Replacement dustbags are
available from your Black & Decker dealer (cat. no. VBP50).
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker VB2050 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker VB2050 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info