531189
10
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
10
Features
This appliance includes some or all of the following features
(fig. A).
1. On/off switch
2. Speed control switch
(VB1630/VB1740/VB1820/VB1850/VB2050)
3. Cord rewind button
4. Handle
5. Cover
6. Hose
7. Airflow control switch
8. Extension tube
9. Suction head
10. Wheels
In addition, this appliance is supplied with some or all of the
following accessories (fig. B):
11. Crevice tool
12. Brush tool
13. Parquet floor head (VB1630/VB1740/VB1850)
14. Turbo brush (VB2050)
The parquet floor head is not included with all models.
This accessory is available from your Black & Decker dealer /
service centre (cat. no. VW70).
The turbo brush is not included with all models. This accessory
is available from your Black & Decker dealer / service centre
(VW80).
Assembly
Fitting the dustbag (fig. C & D)
Warning! Before first use, make sure to fit a dustbag.
Open the cover (5) as shown (fig. C).
Place a dustbag (15) in the dustbag holder (16).
Align the dustbag collar (17) with the inlet (18) (fig. D).
Make sure that the inlet protrudes into the dustbag collar.
Close the cover.
Connecting the hose (fig. E)
Insert the hose connector (18) into the inlet (19) of the
appliance.
Slide the hose further until the release buttons (20) click
into place.
To disconnect the hose, press the release buttons and pull
out the hose.
Mounting the extension tube (fig. F)
Press the lock button (21) and slide the hose nozzle (22)
into the tube (8) until it clicks into place.
To remove the tube, press the lock button and pull the
hose out of the tube.
Mounting the suction head (fig. G)
The suction head (9) allows for vacuuming on carpet and hard
surfaces (e.g. laminate and tiles).
Press the lock button (23) and slide the tube (8) into the
head (9) until it clicks into place.
To remove the head, press the lock button and pull the
tube out of the head.
VB1630/VB1740/VB1850 - Mounting the parquet
floor head (fig. G)
The parquet floor head (13) allows for vacuuming on wooden
and polished surfaces.
Press the lock button (23) and slide the tube (8) into the
head (9) until it clicks into place.
To remove the head, press the lock button and pull the
tube out of the head.
VB2050 - Mounting the turbo brush (fig. G)
The turbo brush (14) allows for vacuuming on cut pile
carpeting. The brush is particularly useful for picking up hair,
threads, etc., as well as for refreshing trotted-down carpet pile.
Press the lock button (23) and slide the tube (8) into the
head (9) until it clicks into place.
To remove the head, press the lock button and pull the
tube out of the head.
Mounting accessories (fig. G & H)
The crevice tool (11) allows for vacuuming in narrow and hard-
to-reach places. The brush tool (12) allows for vacuuming on
furniture, blinds, curtains, windows and stairs. The accessories
can be mounted on both the hose (6) and the tube (8).
When not in use, the accessories can be stored in the
accessory holder (24).
Remove the accessory from the holder (fig. H).
Press the lock button (21 or 23) and slide the accessory
onto the hose nozzle (22) or the tube (8) (fig. G).
To remove an accessory, press the lock button (21 or 23)
and pull the accessory off.
Use
Unwinding and rewinding the cord (fig. A)
The cord rewind button (3) can be operated by hand or foot.
Before use, pull a sufficient length of cord from the back
of the appliance.
After use, press the cord rewind button to store the cord
back into place. Manually guide the cord to ensure it does
not swing back. Ensure the plug is correctly located.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker VB2050 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker VB2050 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info