836045
11
Verklein
Vergroot
Pagina terug
1/27
Pagina verder
GBGB
Switching between Fahrenheit and Celsius
When the device is switched on, press and hold the ‘+’ and ‘-’ buttons at the same time for
5 seconds. In the advanced menu, briefl y press the ‘+’ button until the function text ‘F-C
appears. Then briefl y press the ‘LOCK’ button to switch between Fahrenheit and Celsius and
to display the current unit (display of ‘C’ for Celsius and ‘F’ for Fahrenheit). Then briefl y press
the ‘+’ or ‘-’ button once and the unit will switch.
Troubleshooting
Code Description Action to rectify the fault
E1
E2
E3
E4
E5
E6
Battery voltage is low
Fan failure
Problem starting the cooling box
E7
Communication error between the
display and your module
Contact customer service.
E9
Abnormal phase current
of the compressor module
Check that the ventilation openings are clear.
Place the cool box in a cooler location
(the ambient temperature may be too high)
Defrosting
It is normal for ice to accumulate on the cooling surfaces of a freezer. This is more pronounced
in humid environments. Increased ice formation reduces cooling performance and should be
removed regularly.
Useful tips:
Remove all contents from the fridge and freezer compartments before defrosting.
• Unplug all power cables from the cool box and open the main door.
Allow the ice to thaw and melt on its own (do not use sharp objects to scrape the ice off the
cooling surfaces).
• Use a soft cloth to remove melting ice and water.
• It is best to dry the interior before switching the cool box back on.
Care and cleaning
Exterior:
• Use a soft cloth and, if necessary, a mild detergent to clean the exterior of your cool box.
Ensure that the surfaces are dry before storing the cool box (leave the lid slightly open for
ventilation).
• When storing the cool box, ensure that the power supply is disconnected.
Interior:
The interior should be cleaned regularly to prevent the build-up of bacteria and odours.
Use a soft cloth with a mild detergent or antibacterial soap; do not use abrasive cleaners or
harsh chemicals.
• Do not use ammonia-based cleaning agents or strong acids.
Dust or dirt can accumulate in the ventilation inlet at the rear of the cool box over time.
Check the ventilation openings regularly and blow out the dust or remove loose debris.
Storage when not in use
When your cool box is no longer in use, you should clean it inside and out before storing it. We
recommend:
• Switch off the cool box and remove all power cables.
Leave the lid open so that air can circulate inside the cool box (this helps to keep the interior
dry and prevent odours).
The cooling box speed does not
reach the required values
The device is overloaded
NTC error (open circuit or
short circuit)
Check the battery voltage and adjust the low-voltage cut-
off as necessary.
Contact the point of sale to arrange further action.
Check that the ventilation openings are not blocked.
Move the cool box to a cooler location (the ambient
temperature may be too high)
22
23
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Berger EPL 30 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Berger EPL 30 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 8,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info