836045
9
Verklein
Vergroot
Pagina terug
1/27
Pagina verder
GBGB
Device and accessories
Ventilation clearance
4
Dimensions (L x W xH)
Capacity
Net Weight
Rated Power
Power Source
Rated Current
Temperature Range
Model
-20°C to +20°C
Insulation CFC Free PU Foam
657x401x394 mm 657x401x524 mm
40 L
13.2 kg
60W
5.8A / 2.9A
MCD40D
657x401x459 mm
50 L 60 L
14.5 kg 15.3 kg
MCD50D MCD60D
3. Sketch map of main parts
DC 12V / 24V AC:100-240V~(With adaptor)
DC power cable
Adaptor
Lid Latches
Carry Handle
Tie Down Points
Power Input Panel
Control Panel
The drain hole
NoticeMCD20D & MCD30D whitout drain hole and LED light.
AC power cable
DC cable
AC cable
Adapter
Drain opening
Control panel
Mounting points
Carrying handle
Power connection
NOTE!
The EPL 20 and EPL 30 coolers do not have a drain hole or LED light.
5
4. Ventilation clearance
Slots and openings in the body are provided for ventilation;
to ensure reliable operation and to protect against
overheating, these openings should never be blocked or
covered.
A minimum clearance of 60mm is recommended on the
back, side and front of the fridge for ventilation.
This product should never be placed in a built-in installation
with limited airflow unless adequate ventilation is provided.
Closed compartments should be provided with cool air intake
and warm air exhausts.
60mm
60mm
60mm
5. Reversing the Door Swing
The door of the fridge can be removed and switched to the opposite side. Please refer to the
instructions provided below.
1. Set the door to open at a 60-degree position.
2. Take out the door along the track.
3. When reassembling, tilt the door to a 60-degree as you slide it along the track.
60°
Slots and openings are provided in the housing for
ventilation. To ensure reliable operation and prevent
overheating, these openings must never be blocked or
covered.
A minimum clearance of 60 mm is recommended on
the sides, front and rear to ensure adequate ventila-
tion.
This product must never be installed in a built-in
installation with restricted air flow unless adequate
ventilation is provided.
Enclosed spaces should be equipped with a cool air
supply and warm air exhaust.
Lid opening
5
4. Ventilation clearance
Slots and openings in the body are provided for ventilation;
to ensure reliable operation and to protect against
overheating, these openings should never be blocked or
covered.
A minimum clearance of 60mm is recommended on the
back, side and front of the fridge for ventilation.
This product should never be placed in a built-in installation
with limited airflow unless adequate ventilation is provided.
Closed compartments should be provided with cool air intake
and warm air exhausts.
60mm
60mm
60mm
5. Reversing the Door Swing
The door of the fridge can be removed and switched to the opposite side. Please refer to the
instructions provided below.
1. Set the door to open at a 60-degree position.
2. Take out the door along the track.
3. When reassembling, tilt the door to a 60-degree as you slide it along the track.
60°
The lid of the cool box can be removed and moved to the opposite side. Please follow the inst-
ructions below.
• Adjust the lid so that it opens at a 60º angle.
• Remove the lid along the rail.
• When reinstalling, tilt the lid to 60º while sliding it along the rail.
Lid closure
18
19
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Berger EPL 30 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Berger EPL 30 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 8,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info