711111
18
Verklein
Vergroot
Pagina terug
1/74
Pagina verder
18
Electric replace Use instructions
8. Place the front glass panel over the front of the replace carefully aligning the hooks with the brackets on each
side of the glass panel (Fig. G)
Note: use at least two people to carry out this operation, to avoid the accidental fall and breakage of the
panel.
To rmly secure the glass panel, fasten the screws removed before on each side of the panel until com-
pletely tightened.
Operation and use
After completing installation and mounting operations, plug the appliance to the wall socket.
The appliance has a digital display that shows all the selected settings (Fig. H)
The appliance can be operated by the control panel (found on the top part of the appliance – Fig. I) or by the
remote control.
Turning on the appliance
After plugging the appliance to a wall socket, place the general switch found right below the control panel on “I”.
Press on the control panel or the remote control, the appliance will turn on and the LED ame will light up; it
is now possible to set and/or select the desired function.
To turn the appliance off, press again.
Day/time setting
Day/time setting can be made by the control panel, by pressing , or by the remote control, by pressing “DAY”,
“HOUR” and “MIN”.
To set the day
From control panel: press , display will show the LED indicator related to the selected day of the week (Sun”
– Sunday; “Mon” – Monday; “Tue” – Tuesday; “Wed” – Wednesday; “Thu” – Thursday; “Fri” – Friday; “Sat” – Sa-
turday). Press “+”/”-“ to select the present day of the week.
When the LED indicator related to the selected day stops blinking, the setting is conrmed
From remote control: press ”DAY”, display will show the LED indicator related to the selected day of the week
(see above). Press “+”/”-“ to select the present day of the week.
When the LED indicator related to the selected day stops blinking, the setting is conrmed
To set the time
From control panel: press twice, LED indicator related to the hour on the display will start blinking. Press “+”/”-“
to set the hour (from 00 to 23)
Press three times, LED indicator related to the minutes on the display will start blinking. Press “+”/”-“ to set
the minutes (from 00 to 59)
When the LED indicator related to the selected hour/minutes stops blinking, the setting is conrmed
From remote control: press “HOUR”, LED indicator related to the hour on the display will start blinking. Press
“+”/”-“ to set the hour (from 00 to 23)
Press “MIN”, LED indicator related to the minutes on the display will start blinking. Press “+”/”-“ to set the minutes
(from 00 to 59)
When the LED indicator related to the selected hour/minutes stops blinking, the setting is conrmed
Flame intensity adjustment
The intensity of the ame can be regulated from the control panel, or from the remote control, simply by pres-
sing until the desired level of intensity is selected.
5 levels of intensity are available, from the highest to the lowest.
Selection is shown on display.
Heating mode setting
Heating mode can be set both from control panel and remote control.
To set heating mode from control panel, press as follows:
Press once to select low heating mode
Press twice to select high heating mode
Press three times to turn heating off; the fan will keep operating for approx. 10 seconds before coming to a
complete stop
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Beper RI503 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Beper RI503 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 2,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info