711111
17
Verklein
Vergroot
Pagina terug
1/74
Pagina verder
17
Electric replace Use instructions
EN
Before use
Remove the replace from the box.
Remove all packaging and wrapping material before mounting and operating.
Package Contents
Electric Fireplace
Front Panel
Pebble Pack
Anchor bracket (for wall installation)
Installation Components Pack Containing:
Screws and Wall Anchors
Support bracket
Remote Control
Instruction Manual
Installation
Note: this replace is not equipped with any support for free-standing installation.
Warning: for correct installation and mounting of the replace, please contact specialized technical
personnel
This appliance is exclusively designed to be wall mounted at a minimum height of 30 cm from the oor (measured
from the bottom side of the glass panel), and at a minimum distance of 100 cm from the ceiling (measured from
the top side of the glass panel).
The mounting kit provided with the appliance includes:
6 screws for wall support and anchor brackets
6 wall anchors for mounting of anchor bracket
2 small screws for fastening of support bracket to the replace
1 wall anchor bracket
1 support bracket
The wall bracket must be tted horizontally and the cable routed to the bottom right of the heater.
For optimal viewing of the pebble bed and the ame effects, it is advisable to install the replace at a height of 60
cm from the oor (measured from the bottom side of the glass panel).
Before mounting the replace on the wall, it is necessary to remove the front glass panel. Carefully place the
appliance on a at and stable surface, away from any ornament or other object that may accidentally damage
the glass. Remove the screws found on the right and left side of the panel, and carefully remove the glass panel
by pulling upwards.
Note: it is advisable to use at least two people to carry out this operation, to avoid the accidental fall and
breakage of the panel.
It is now possible to proceed with wall mounting of the replace:
1. Select the wall location where you want to hang your electric replace heater. Draw a horizontal line using a
level and mark 4 drill holes for the anchor screws (Fig. A)
2. Drill 4 holes on the marked locations. Install the wall anchors into the holes and gently tap them into place with
a hammer until the ange of wall anchor is ush with the wall surface. (Fig. B)
3. Secure the anchor bracket to the wall anchors using the 4 screws provided (Fig. C)
4. Mount the replace on the wall using the slots of the metal bracket found at the back of the replace. Make
sure that the anchor bracket xed on the wall is completely engaged into the metal bracket at the back of the
replace. (Fig. D)
5. Secure the support bracket to the bottom part of the replace using the 2 smallest screws provided. (Fig. E)
6. Mark the bottom holes position on the wall, and take the replace down. Drill the wall with applicable drill bit
and insert the wall anchors. Reinstall the replace and, using the 2 left screws, fasten the bottom support bracket
to rmly install the replace in place. (Fig. F)
7. Unpack the pebbles from the bag and place them along the light unit in the desired position.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Beper RI503 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Beper RI503 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 2,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info