806823
5
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
CONTROL PANEL
DAILY USE
SWITCHING THE HOB ON/OFF
To switch the hob on, keep button “A“ pressed for approx. 2 seconds.
The 4 cooking zone displays show “0. If within 20 seconds none of the
cooking zones is activated, the hob switches o automatically as a safety
precaution.
SWITCHING ON AND ADJUSTING COOKING ZONES
Press one of the buttons “B“ corresponding to the cooking zone you
intend to use. Select the heat setting required with buttons “E“ or “C“.
The other selectable cooking settings go from 1 to 9. Press buttons “+/−“
at the same time to cancel all settings.
IMPORTANT: the control is deactivated 10 seconds after the heat setting has
been selected.
To change the heat setting, rst press the selection button “B“ again, then
proceed to change the setting, using buttons “E“ or “C“.
MULTIPLE ZONE
After selecting the desired zone and setting the level (as described in
the previous section) press “F“: an indicator above the button turns
on,activating the additional zone.
The multiple zone can only be used if:
The cooking zone is provided with multiple zone;
The power level selected is greater than 0.
To deactivate the multiple zone, press button “B“ of the desired zone,
then press “F“ again.
TIMER
To set the Timer function, select the desired cooking zone and power
setting then press the cooking zone key again and a luminous dot
will appear on the display of the timer-controlled cooking zone. The
indication “00“ blinks on the 2 displays. Press buttons “C“ or “E“ to set
the time from 1 to 99.
IMPORTANT: after 10 seconds the timer displays will show the power
setting of the other cooking zones.
To view the remaining cooking time, press the timer-controlled cooking
zone key twice.
A FUNCTION
This function allows to automatically decrease the cooking zone power
level from the highest value (level 9) to the one selected by the user for
a later stage of cooking.
To activate this function rst press the “+“ button when level 9 is reached.
The display shows “A“ and “9“ ashes alternately with low brightness.
At this point, choose the desired power level (less than 9) with the “–“
button.
A“ and selected level ash alternately with low brightness on the display.
The function is activated once “A“ and the selected level ash alternately
with high brightness on the display.
Once “A“ is no longer visible on the display (the “A“ function switches o
automatically after several minutes, depending on the set power level),
the cooking process continues with lower power and the display shows
only the selected power level.
N.B.: this function is not possible with level 9.
KEY LOCK
The Key lock function is switched on by holding down button “D“ until
a dot lights up above the function button. The control panel is locked
except for the switching-o function. The function remains on even after
the hob is switched o and on again and can be deactivated by pressing
button “D“ again until the dot above the function button goes o.
When the hob is o with the key lock activated to switch the hob on, rst
deactivate the key lock function by pressing button “D“ again until the
dot above the function button goes o.
The presence of water, liquid spilled from pots or any objects resting on
the controls can accidentally activate or deactivate the Key lock function.
RESIDUAL HEAT INDICATOR
When the cooking zone is switched o, the residual heat indicator “H“
remains on or ashes alternating with “0“ until the temperature of the
hob returns within safety levels.
IMPORTANT: The hob’s safety features include an automatic switching
o function. Prolonged use of the same heat setting triggers automatic
switch-o of the cooking zone (for example, after around 1 hour at
maximum heat setting, the cooking zone switches o).
IMPORTANT: To avoid a permanent damage the hob:
do not use pots with bottoms that are not at;
do not use metal pots with enamelled bottom;
do not place hot pots/pans over the control panel.
FIRST TIME USE
Upon rst installation, the control panel performs a functional test for about
1 second, after which it automatically switches to the “Key lock” function.
To deactivate the function, press and hold button “D”; an acoustic signal
will sound and the corresponding led will turn o.
NOTE: If a reset occurs, repeat the procedure described above.
F
B
E
C D
A
AOn/O
BCooking zone and timer selection
C-E Heat setting increase and decrease
DKey lock
FMultiple zone Activation / Deactivation
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bauknecht CTAR 7642 IN bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bauknecht CTAR 7642 IN in de taal/talen: Engels als bijlage per email.

De handleiding is 0.63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Bauknecht CTAR 7642 IN

Bauknecht CTAR 7642 IN Gebruiksaanwijzing - Nederlands - 7 pagina's

Bauknecht CTAR 7642 IN Gebruiksaanwijzing - Deutsch - 7 pagina's

Bauknecht CTAR 7642 IN Gebruiksaanwijzing - Français - 7 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info