628507
3
Verklein
Vergroot
Pagina terug
1/3
Pagina verder
Application Note: 121 EF1210TEC Addendum
ASPI Digital - The Sound of DSP 3
Systems with More Than Seven Microphones
If more than seven microphones are needed, one or more EF1210s may be added to the system
to provide echo cancellation on each microphone channel. In general, only one EF1210TEC is
needed in the room, and standard EF1210s may be used for additional microphones.
C
ONFIGURING
THE
TEC
The AEC channels of the EF1210TEC can be calibrated and configured as described in the
EF1210 User Manual.
The EF1210TEC may be configured as a standard EF1210 by setting the DIP switch labelled
“Reserved” next to the Device ID 16 DIP switch. When in the off position, the EF1210TEC
behavior will be selected. In the on position, the standard EF1210 behavior is selected.
C
OMMAND
S
ET
C
HANGES
There are three new RS-232 commands in the EF1210TEC. They are TDCD, TDCMIN, and
TDCMAX (the acronym TDC is used because these commands deal with the properties of the
Transmission Delay Compensator as described in the introduction to this addendum). As with
the EF1210, the device type of the EF1210TEC is C.
The TDCD command queries the delay detected by the Transmission Delay Compensator.
This command is used for queries only. For example, the command C00TDCD? queries the
delay detected by the EF1210TEC with device ID 0. The command response contains a delay
value in milliseconds (accurate to within a few milliseconds). If the EF1210TEC were to
return C00TDCD500, the delay detected by the Transmission Delay Compensator is about 500
milliseconds.
The TDCMIN and TDCMAX commands set the minimum and maximum delay over which
the Transmission Delay Compensator will search fo r echoes. Reducing the search range may
cause echoes to be found and cancelled more quickly. For instance, if you know the echo is
delayed somewhere between 600-800 milliseconds, you can set TDCMIN to 500 ms, and
TDCMAX to 1000 ms. This will allow echoes to be found more quickly than if the Transmis-
sion Delay Compensator had to search over the entire 2 second range. It is important not to set
the range too narrowly, because if the delay falls outside of the search range, the TEC will not
be able to cancel echoes. The delay is set in milliseconds. Examples of commands are
C00TDCMIN250 and COOTDCMAX750. The current settings can be queried with a ques-
tion mark as the argument.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aspi EF1210 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aspi EF1210 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Aspi EF1210

Aspi EF1210 Gebruiksaanwijzing - English - 112 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info