548874
2
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
Helpline No. UK/Northern Ireland 0871 288 6921 Helpline No. UK/Northern Ireland 0871 288 6921 Helpline No. UK/Northern Ireland 0871 288 6921 Helpline No. UK/Northern Ireland 0871 288 6921
Rep. Ireland 014 319790 Rep. Ireland 014 319790 Rep. Ireland 014 319790 Rep. Ireland 014 319790
Web Support www.produktservice.info Web Support www.produktservice.info Web Support www.produktservice.info Web Support www.produktservice.info
Page 2
After Sales Support
Now you have purchased an Ascot product you can rest assured in the
knowledge that as well as your 3 year parts and labour warranty you
have the added peace of mind of dedicated helplines and web support.
What your three year warranty means:
Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly. In
the event of product failure within its intended use over the course of the
first 3 years after date of purchase, we will remedy the problem as fast as
possible once it has been brought to our attention. In the unlikely event
of such an occurrence, or if you require any information about the
product, please contact us via our helpline support services, details of
which are to be found in this manual.
This warranty does not affect your statutory rights.
2.12 Contents
1 base station
1 external sensor
1 x 1.5v AA batteries for the base station
2 x 1.5v AAA batteries for the external sensor
1 set of operating instructions
Tip: Not included in the pack are further external sensors or sensor
extension cable for the external sensors.
3 Display and function keys
3.1 Base station
Front view of the base station
- Time, date, alarm
Radio clock time / quartz clock
Displays day, month and day of the week
Time in 12 or 24-hour clock format
Time zone setting +/- 12 hours
2 alarm settings with snooze function
Transmitter call function for the radio clock time
Radio tower symbol
- External temperature and air humidity display
External temperature for up to 3 external sensors:
- current reading
- min/max memory
- display in °C / °F
- trend display:
External air humidity for up to 3 external sensors:
- current reading
- min/max memory
- trend display
Display of selected external sensor or automatic switching between
sensors
Low battery indicator for external sensors
- Internal temperature and air humidity display
Internal temperature: - current reading
- min/max memory
- display in °C / °F
- trend display
Interior air humidity: - current reading
- min/max memory
- trend display
Low battery indicator for base station
- Weather forecast
Weather forecast with 5 symbols
Weather tendency
- Air pressure
Air pressure display:
- Display in hPa
- min/max memory
- Air pressure diagram
Display of the development of air pressure over the past
12 hours in 5 stages
- Moon phase, time of sunrise and sunset, time of moonrise and
moonset
Phase of the moon
Time of sunrise and sunset
Time of moonrise and moonset
Select region and city
- Light
View of base station from above
Rear view of base station
3.2 External sensor
Front view of external sensor
Rear view of external sensor
4 Putting the device into operation
We recommend that you read the operating instructions carefully before
using the Weather Station for the first time. In particular, before using
the device for the first time, please read point 3.1, Base station and point
3.2, External sensor to become familiar with the Weather Station’s
function keys.
Put the device into operation on a table where you can lay the base
station and the external sensor next to each other or stand them upright
1. Remove the battery compartment cover located at the rear of
the base station.
2. Also remove the battery compartment cover located at the rear
of the external sensor. First push the retractable stand in the
direction of the arrow so that you can remove the battery
compartment cover. Please unscrew the battery compartment
cover using a small screwdriver.
Tip: Please note that the batteries must be inserted in the base
station first and then in the external sensor otherwise the base
station may fail to receive the external sensor’s signal.
3. First insert the 2 x 1.5V AA batteries in the base station’s
battery compartment (note +/- polarity).
Tip: Please ensure that the batteries are new and are the correct
size.
When you have inserted the batteries correctly, this will be
confirmed by an audible tone. Now you can close the battery
compartment again with the compartment cover.
4. Then insert the 2 x 1.5V AAA batteries in the external sensor’s
battery compartment (note +/- polarity). Leave the battery
compartment open so that you can set more settings.
Tip: Please ensure that the batteries are new and are the correct
size.
1
4
5
3
2
6
7
1
2
3
4
5
6
7
Connector for
sensor extension
cable (not
included)
Display for external
temperature in °C/°F
and humidity
TX ke
y
C/F ke
y
Retractable
stan
d
Channel
Hanging kit for
wall assembl
y
Batter
y
Batter
y
com
p
artment
Screws for battery
compartment cover
Battery
com
p
artment
Battery-change
indicator
Stan
d
Transmitting
signal indicator
Channel
indicator
LIGHT/SNOOZE key
SET/ZONE key
CHANNEL key
ALARM key
MIN/MAX key
CLEAR/SET/BARO
key
‚+ key ‚- key
B key B key
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ascot AUK-WS-11 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ascot AUK-WS-11 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info