537057
13
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
13
PART 5 - TROUBLESHOOTING PROBLEMS
POSSIBLE CAUSE
Baby was removed from his/her bed and Nursery
Unit was not switched OFF.
The SensorPad plug is not connected properly to the
Nursery Unit.
The SensorPad is not in full contact with baby’s
mattress and/or the mattress is not resting on a
completely flat or rigid surface.
Your baby is in a very deep sleep or has moved to a
corner of the bed, away from the SensorPad.
The sensitivity setting of the SensorPad is too low,
e.g. level 1.
The Nursery Unit is detecting external movement or
vibrations when baby’s bed is being touched.
The units are not connected. The Parent Unit shows
a flashing Nursery Unit and ‘- -‘ in the display.
One of the units if OFF, due to low or incorrect
installed batteries.
One of the units is OFF, due to the AC adapters
are not connected properly or the mains socket is
turned off.
One of the units is OFF.
If both units are ON, the two units are not connected.
The Nursery Unit is not switched ON.
There might be some interference on the chosen
transmission channel.
The AC adapters are not connected properly or the
mains socket is out of order or not switched on.
The Nursery unit is not turned ON.
DESCRIPTION
The SensorPad is giving
false alarms
The SensorPad alarm
does not go off
No sound is being
transmitted
The Parent Unit shows
a flashing Nursery Unit
icon and ‘- -’ in the
display. There is no
connection between the
Parent Unit and Nursery
Unit
The sound transmission
is intermittent
The power ON indicator
(second green light) on
the Nursery Unit does not
light up
HOW TO SOLVE
Turn off the Nursery Unit.
Verify the connection between the SensorPad and
Nursery Unit. Unplug and reconnect the cord.
Make sure there is no bedding between mattress
and SensorPad. The SensorPad must rest on a
completely flat and rigid surface. Place a piece of
6mm thick plywood under the SensorPad. Please
follow the instructions in Part 2, Step 1.
Make sure the SensorPad is positioned, installed and
tested as described in Part 2, Steps 1 to ensure that
the SensorPad is covering the complete mattress,
also in the corners of the bed.
If the sensitivity level is too low, the SensorPad may
not detect your baby’s movements. The standard
setting of the SensorPad sensitivity is approx. 3.
This setting works for most baby bed sizes and
mattresses and can be adjusted with the dial on the
back of the Nursery Unit. ALWAYS install and test the
SensorPad according to the instructions in
Part 2, Step 7.
Avoid contact with the crib when monitor is ON.
Re-establish connection between the two units, see
Part 2, Step 4.
Check/replace the batteries or recharge the Parent
Unit.
Check if all AC adapters are working correctly and if
the mains socket are turned ON.
Ensure both units are ON.
Re-establish connection between the two units, see
Part 2, Step 4.
Turn the Nursery Unit on by moving the left wing to
the UP position.
Change the transmission channel to one of the other
8 channels until sound transmission is clear or follow
the reconnection procedure, see Part 2, Step 5.
Check the connections and/or change to another
electrical socket.
Move the left wing to the ON position (UP).
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Angelcare AC401de luxe bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Angelcare AC401de luxe in de taal/talen: Engels als bijlage per email.

De handleiding is 0,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Angelcare AC401de luxe

Angelcare AC401de luxe Gebruiksaanwijzing - Nederlands - 7 pagina's

Angelcare AC401de luxe Gebruiksaanwijzing - Nederlands, Deutsch, Français, Português, Espanõl, Polski, Dansk, Svenska, Norsk, Suomi - 87 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info