495938
4
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
4
Wireless Connectivity
The transmitter base and speaker can communicate over
three wireless radio frequency (RF) channels. The default
setting is AUTO. You may also manually select one of the
three channels.
In AUTO, the transmitter base looks for and transmits
on the most interference-free of the three channels. The
speaker searches the channels until it finds the base.
It is possible that the speaker and base may lose their
synchronized connection from time to time. You may also
experience interference with the connection.
If you experience interference or lose the connection
between speaker and transmitter base, you can force the
M812 to re-synchronize. To do so, press and hold down
the STANDBY key on the transmitter base. After three
seconds, the LED to the left of the STANDBY key will
begin to flash. Continue to hold down the STANDBY key
until the LED stops flashing (about six seconds).
If you continue to experience interference, check to see
if you can eliminate the source by moving other devices
that use the same RF spectrum. For instance, laptop
computers that use 802.11 wireless networking can
conflict with your M812 wireless connection.
If problems persist, you can manually set the radio
frequency (RF) channel to channel 1, 2 or 3. To do so,
follow the instructions in Advanced Operations under the
heading Set RF Channels (page 8).
Listening To Your M812
Remote Control Operation
To control the M812, the remote control must be pointed
toward the front of the speaker. (In a multi-speaker
system, any speaker that is synchronized can control the
system.) The transmitter base does not have an IR sensor.
Commands are transmitted to the base from the speaker.
The M812 remote control uses two AAA-size batteries.
Power and Input Selection
To turn on the M812, press the STANDBY key on the
transmitter base or the POWER key on the side of the
speaker or the remote control. Select iPod, FM or AUX
by pressing the input selector on the speaker or using the
remote control.
iPod
With your iPod docked in the transmitter base, turn on
your iPod.
Press
on the remote to start playing the iPod. (You
can also press
on the iPod itself.)
FM
To change the radio tuning, press
or on the remote
or the TUNE +/– keys on the speaker. Hold the key down
to make the tuner scan to the next strong signal. Press
the key repeatedly to manually adjust the tuning.
The M812 can store up to six of your favorite FM stations.
To PRESET a station, tune to the desired frequency, then
press and hold the desired PRESET key on the remote
until PRESET shows on the speaker display.
AUX
To play music from an auxiliary audio device, connect the
device to the transmitter base. Control music play back
using the controls on the auxiliary device.
Volume
There are two levels of volume control: local and master.
The range for local and master volume is 0 to 80.
Local volume affects only one speaker at a time. To adjust
local volume, use the + and – keys on the remote control
while pointing the remote control at the speaker that you
want to adjust. You can also adjust local volume using the
VOLUME keys located on the side panel of the speaker.
Master volume allows you to adjust all speakers in a
multi-speaker system from a single location. Master
volume can be adjusted using the MASTER VOL keys on
the remote control.
If you have a single-speaker system, you may use master
and local volume interchangeably.
Treble and Bass
To control treble or bass levels, press the TREBLE or
BASS keys on the remote control. The display on the
speaker will indicate the levels.
Reset
To reset your M812 settings, press and hold the POWER
key
on the side of the speaker for three seconds. See
the Advanced Operation section for more information on
the reset function.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Altec Lansing M812 - Octiv wireless bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Altec Lansing M812 - Octiv wireless in de taal/talen: Engels als bijlage per email.

De handleiding is 0,63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info