168543
3
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
3
EspañolFrançais
English
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS. Arrange wiring and cables
in compliance with the manual to prevent obstructions
when driving. Cables or wiring that obstruct or hang
up on places such as the steering wheel, gear lever,
brake pedals, etc. can be extremely hazardous.
DO NOT SPLICE INTO ELECTRICAL CABLES. Never
cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying
capacity of the wire and result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING
HOLES. When drilling holes in the chassis for
installation, take precautions so as not to contact,
damage or obstruct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precautions may
result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR
STEERING SYSTEMS TO MAKE GROUND CONNEC-
TIONS. Bolts or nuts used for the brake or steering
systems (or any other safety-related system), or tanks
should NEVER be used for installations or ground
connections. Using such parts could disable control of
the vehicle and cause fire etc.
KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS
OUT OF THE REACH OF CHILDREN. Swallowing them
may result in serious injury. If swallowed, consult a
physician immediately.
CAUTION
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage
to the product. Return it to your authorized Alpine
dealer or the nearest Alpine Service Center for
repairing.
HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS. The wiring and installation of this unit
requires special technical skill and experience. To
ensure safety, always contact the dealer where you
purchased this product to have the work done.
USE SPECIFIED ACCESSORY PARTS AND INSTALL
THEM SECURELY. Be sure to use only the specified
accessory parts. Use of other than designated parts
may damage this unit internally or may not securely
install the unit in place. This may cause parts to
become loose resulting in hazards or product failure.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE. Route the
cables and wiring away from moving parts (like the
seat rails) or sharp or pointed edges. This will prevent
crimping and damage to the wiring. If wiring passes
through a hole in metal, use a rubber grommet to
prevent the wires insulation from being cut by the
metal edge of the hole.
DO NOT INSTALL IN LOCATIONS WITH HIGH
MOISTURE OR DUST. Avoid installing the unit in
locations with high incidence of moisture or dust.
Moisture or dust that penetrates into this unit may
result in product failure.
NE PAS COINCER LES CABLES AVEC DES OBJETS
VOISINS. Positionner les câbles conformément au
manuel de manière à éviter toute obstruction en cours
de conduite. Les câbles qui obstruent ou dépassent à
des endroits tels que le volant, le levier de change-
ment de vitesses, la pédale de frein, etc., peuvent
savérer extrêmement dangereux.
NE PAS DENUDER LES CABLES ELECTRIQUES. Ne
j
amais enlever la gaine isolante pour alimenter un autre
appareil. Il y a risque de dépassement de la capacité de
courant et, partant, dincendie ou de choc électrique.
NE PAS ENDOMMAGER DE CONDUITES NI DE CABLES
LORS DU FORAGE DES TROUS. Lors du forage de trous
dans le châssis en vue de linstallation, veiller à ne pas
entrer en contact, endommager ni obstruer de conduites, de
tuyaux à carburant ou de fils électriques. Le non-respect de
cette précaution peut entraîner un incendie.
NE PAS UTILISER DES ECROUS NI DES BOULONS
DU CIRCUIT DE FREINAGE OU DE DIRECTION POUR
LES CONNEXIONS DE MASSE. Les boulons et les
écrous utilisés pour les circuits de freinage et de
direction (ou de tout autre système de sécurité) ou les
réservoirs ne peuvent JAMAIS être utilisés pour
linstallation ou la liaison à la masse. Lutilisation de
ces organes peut désactiver le système de contrôle du
véhicule et causer un incendie, etc.
GARDER LES PETITS OBJETS COMME LES BOULONS
OU LES VIS HORS DE PORTEE DES ENFANTS.
Lingestion de tels objets peut entraîner de graves
blessures. En cas dingestion, consulter immédiate-
ment un médecin.
ATTENTION
INTERROMPRE TOUTE UTILISATION EN CAS DE
PROBLEME. Le non-respect de cette précaution peut
entraîner des blessures ou endommager lappareil.
Retourner lappareil auprès du distributeur Alpine
agréé ou un centre de service après-vente Alpine en
vue de la réparation.
F
AIRE INSTALLER LE CABLAGE ET LAPPAREIL PAR DES
EXPERTS. Le câblage et linstallation de cet appareil requiert
des compétences techniques et de lexpérience. Pour
garantir la sécurité, faire procéder à linstallation de cet
appareil par le distributeur qui vous la vendu.
UTILISER LES ACCESSOIRES SPECIFIES ET LES INSTALLER
CORRECTEMENT. Utiliser uniquement les accessoires
spécifiés. Lutilisation dautres composants que les
composants spécifiés peut causer des dommages internes à
cet appareil ou son installation risque de ne pas être effectuée
correctement. Les pièces utilisées risquent de se desserrer et
de provoquer des dommages ou une défaillance de lappareil.
FAIRE CHEMINER LE CABLAGE DE MANIERE A NE
PAS LE COINCER CONTRE UNE ARETE METALLIQUE.
Faire cheminer les câbles à l’écart des pièces mobiles
(comme les rails dun siège) et des arêtes acérées ou
pointues. Cela évitera ainsi de coincer et dendomma-
ger les câbles. Si un câble passe dans un orifice
métallique, utiliser un passe-cloison en caoutchouc
pour éviter que la gaine isolante du câble ne soit
endommagée par le rebord métallique de lorifice.
NE PAS INSTALLER A DES ENDROITS TRES
HUMIDES OU POUSSIEREUX. Eviter dinstaller
lappareil à des endroits soumis à une forte humidité
ou à de la poussière en excès. La pénétration
dhumidité ou de poussière à lintérieur de cet appareil
risque de provoquer une défaillance.
I
MPIDA QUE LOS CABLES SE ENREDEN CON LOS
OBJETOS SITUADOS ALREDEDOR. Disponga la
instalación eléctrica y los cables conforme a lo descrito
en el manual para evitar obstáculos durante la conduc-
ción. Los cables que obstaculizan la conducción o que
cuelgan de partes del vehículo como el volante de
dirección, la palanca de cambios, los pedales de freno,
etc., se consideran extremadamente peligrosos.
NO EMPALME CABLES ELÉCTRICOS. Nunca corte el
aislamiento de un cable para suministrar energía a otro equipo.
Esto hace que la capacidad portadora del cable se supere y
puede ser la causa de incendios o descargas eléctricas.
EVITE DAÑAR LOS TUBOS Y EL CABLEADO CUANDO
TALADRE AGUJEROS. Si taladra agujeros en el chasis
durante la instalación, tome las precauciones necesarias
para no rozar, dañar u obstruir los tubos, las tuberías de
combustible, los depósitos o el cableado eléctrico. De lo
contrario, podría provocar un incendio.
NO UTILICE TUERCAS O PERNOS EN EL SISTEMA DE
FRENOS O DE DIRECCIÓN PARA REALIZAR LAS
CONEXIONES A MASA. Los pernos o tuercas
empleados en los sistemas de freno o de dirección (o en
cualquier otro sistema relacionado con la seguridad del
vehículo), o los depósitos, NUNCA deben utilizarse para
instalaciones de cableado o conexión a masa. Si utiliza
tales partes podrá incapacitar el control del vehículo y
provocar un incendio, etc.
MANTENGA LOS OBJETOS PEQUEÑOS, COMO PERNOS
Y TORNILLOS, FUERA DEL ALCANCE DE LOS NIÑOS. La
ingestión de estos objetos puede provocar lesiones
graves. Si esto ocurre, consulte con un médico
inmediatamente.
PRUDENCIA
DEJE DE USAR LA UNIDAD INMEDIATAMENTE SI
APARECE ALGÚN PROBLEMA. Su uso en estas
condiciones podría ocasionar lesiones personales o
daños al producto. Lleve la unidad a un distribuidor
Alpine autorizado o al Centro de servicio Alpine más
próximo para repararla.
CONFÍE EL CABLEADO Y LA INSTALACIÓN A PROFESIONA-
LES. El cableado y la instalación de este equipo requieren una
competencia y experiencia técnica confirmada. Para garantizar
la seguridad, póngase siempre en contacto con el distribuidor
al que ha comprado el equipo para confiarle estas tareas.
UTILICE LOS ACCESORIOS ESPECIFICADOS E
INSTÁLELOS CORRECTAMENTE. Asegúrese de
utilizar los accesorios especificados solamente. La
utilización de otras piezas no designadas puede ser la
causa de daños en el interior de la unidad o de una
instalación incorrecta. Las piezas pueden aflojarse, lo
que, además de ser peligroso, puede provocar averías.
DISPONGA EL CABLEADO DE FORMA QUE LOS
CABLES NO SE DOBLEN, NO SE CONTRAIGAN NI
ROCEN UN BORDE METÁLICO AFILADO. Aleje los
cables y el cableado de piezas móviles (como los raíles
de los asientos) o de bordes puntiagudos o afilados.
De esta forma evitará dobleces y daños en el cableado.
Si los cables se introducen por un orificio de metal,
utilice una arandela de goma para evitar que el borde
metálico del orificio corte el aislamiento del cable.
NO INSTALE LA UNIDAD EN LUGARES MUY
HÚMEDOS O LLENOS DE POLVO. Evite instalar la
unidad en lugares con altos índices de humedad o
polvo. Si entra polvo o humedad, el equipo puede
averiarse.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Alpine mrd m 605 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Alpine mrd m 605 in de taal/talen: Engels, Frans, Spaans als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info