471389
9
Verklein
Vergroot
Pagina terug
1/37
Pagina verder
7-EN
3
Press RESET with a ballpoint pen or similar pointed object.
Adjusting Volume
1
Turn the Rotary encoder until the desired sound is
obtained.
Setting the Dimmer Control (CDE-112Ri/
CDE-113BT/CDE-114BTi only)
1
Press FUNC.SETUP so that the indicator lights up.
2
Press 6DIMMER repeatedly to select the DIMMER mode.
DIMMER-A (Auto mode) DIMMER ON DIMMER OFF
DIMMER-A
DIMMER-A mode:
Decrease the illumination brightness of the unit with the head
lights of the vehicle ON. This mode is useful if you feel the units
backlighting is too bright at night.
DIMMER ON mode:
Keep the illumination brightness of the unit dark.
DIMMER OFF mode:
Keep the illumination brightness of the unit bright.
3
Press FUNC.SETUP to activate the normal mode.
The indicator goes out.
Notes
Operate the unit while the indicator lights up. If no operation is
performed for 10 seconds, the indicator goes out.
The function is inoperable when the ILLUMINATI is set to other than
TYPE1 for CDE-112Ri/CDE-113BT, refer to “Changing Lighting
Colour (CDE-112Ri/CDE-113BT only)” on page 17.
* The illustrator is for CDE-114BTi.
Listening to Radio
1
Press SOURCE to select TUNER mode.
2
Press BANDTA repeatedly until the desired radio band is
displayed.
F1 (FM1) F2 (FM2) F3 (FM3) MW LW F1 (FM1)
3
Press TUNEA.ME to select the tuning mode.
DX SEEK (Distance mode) SEEK (Local mode) OFF (Manual
mode) DX SEEK
Note
The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press or to tune in the desired station.
Holding down or will change the frequency
continuously.
Presetting Stations Manually
1
While receiving the station that you want to store, press
and hold, for at least 2 seconds, any one of the preset
buttons (1 through 6) into which you wish to store the
station.
The display shows the band, preset number and station
frequency memorised.
Notes
A total of 30 stations can be stored in the preset memory (6 stations for
each band; FM1, FM2, FM3, MW and LW).
If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
If the indicator is illuminated, turn off the indicator by pressing
FUNC.SETUP, and then you can perform the operation.
RESET switch
Radio
BAND/TA
SOURCE/
FUNC./SETUP
TUNE/A.ME

Preset buttons
(1 through 6)
9

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Alpine-CDE-114BTi

Zoeken resetten

  • Als ik een cd wil plaatsen gaat het toestel knipperen, en doet dus niks.
    Moet hij dan gereset worden ? en zo ja, hoe doe ik dat ? Gesteld op 26-11-2013 om 10:20

    Reageer op deze vraag Misbruik melden
    • De reset knop bevind zich onder het "frontje". Het is een klein knopje, links schuin onder de CD lade. Indrukken met een puntig voorwerp , bv een balpen.

      Sukses Fred Geantwoord op 1-12-2013 om 08:39

      Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Alpine CDE-114BTi bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Alpine CDE-114BTi in de taal/talen: Engels als bijlage per email.

De handleiding is 2,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Alpine CDE-114BTi

Alpine CDE-114BTi Gebruiksaanwijzing - Nederlands - 40 pagina's

Alpine CDE-114BTi Gebruiksaanwijzing - Deutsch - 41 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info