574293
6
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
MPT-250B SPECIFICATIONS AND
OPERATING INSTRUCTIONS
DATASHEET
______________________________________________________________________
Daniels Manufacturing Corporation, 526 Thorpe Road, Orlando, FL 32824, U.S.A.
Phone: (407) 855-6161 Fax (407) 855-6884 www.dmctools.com Email: dmc@dmctools.com
Copyright©2013 All Rights Reserved Page 6 of 6 Rev. M 10/13 MPT-250B-DS
4.3.2 Depress the operating lever of the self tightening cam type upper grip to open far enough to accept the test
sample (wire). When you release the lever, the cam wheel will grip the wire.
4.4 SAMPLE OPERATION
The following is an example procedure for testing a wire specimen after the unit has successfully completed the
STARTUP SEQUENCE (section 4.1.4):
4.4.1 Place the terminal end of the wire sample in the Lower Grip (section 4.2).
4.4.2 Pull the sample to remove any slack in the wire and place the opposite end of the wire sample in the Upper Grip
(section 4.3).
4.4.3 Once the sample is taut between the grips, press the motor control START switch (section 3.3.1).
The pull wheel will turn in a clockwise motion thereby tightening the grip on the sample and applying tension to
the wire.
4.4.4 The unit will cease operation once the sample has failed (section 3.5.1) or the force limit has been reached.
Record the value indicated on the display panel.
4.4.5 Press the motor control RESET switch (section 3.3.1) to return the pull wheel to the start position to allow for
the next test.
4.4.6 Press the display control RESET switch (section 3.3.3) to return the display to zero.
4.4.7 Repeat steps 4.4.1 to 4.4.6.
5. CALIBRATION
The MPT-250B wire crimp pull tester is factory calibrated with equipment traceable to the NIST. It is recommended practice
to return the unit to DMC for calibration. In order to maintain traceability to NIST, do not exceed 12 months between
factory calibration intervals. The internal calibration test sequence is a reliable verification that the tester is accurate, but it
does not assure traceability to NIST.
6. TRANSPORT
It is recommended that the MPT-250B wire crimp pull tester be transported within a sufficiently sturdy box to handle the
weight of the tester and that the tester be surrounded with impact absorbing material (i.e. foam) on ALL sides in the box.
It is recommended that any accessories (i.e. grips) being transported with the tester be individually packed and wrapped in
foam to avoid damage.
7. PREVENTATIVE MAINTENANCE/ADJUSTMENT
It is recommended that the MPT-250B wire crimp pull tester be kept clean and free of debris on a daily basis using a dry
cloth.
CALIBRATION ADJUSTMENT OR MAINTENANCE IS TO BE DONE ONLY BY A CERTIFIED OPERATOR OR DMC.
No adjustment or maintenance is to be performed by end users if not certified/trained by DMC.
LIMITATION OF LIABILITY/LIMITED WARRANTY*
DANIELS MANUFACTURING CORPORATION IS NOT LIABLE FOR CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY NATURE OR
KIND RESULTING FROM THE USE OF ANY OF ITS PRODUCTS. OWNERS AND USERS OF DMC PRODUCTS ASSUME FULL
RESPONSIBILTY FOR INSTRUCTING THEIR EMPLOYEES IN THE PROPER AND SAFE USE OF SUCH PRODUCTS.
Daniels Manufacturing Corporation warrants each new unit sold by it to be free from defects in material and workmanship
under normal use and service. Its obligation under this warranty is limited to the free correction or, at its option, the refund of
the purchase price of any such unit which proves defective within ninety (90) days after delivery to the first user, provided that
the unit is returned with all transportation charges prepaid, and which shall appear to its satisfaction, upon inspection by it, to
have been defective in material or workmanship. This warranty shall not cover any damage to such products, which in the
opinion of Daniels Manufacturing Corporation, was caused by normal wear, misuse, improper operation or accident. This
warranty is in lieu of all other warranties express or implied. No warranty, express or implied, is made or authorized to be
made or assumed with respect to products of Daniels Manufacturing Corporation, other than that herein set forth.
*as defined by PL93-637
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Alphatron MPT-250B bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Alphatron MPT-250B in de taal/talen: Engels als bijlage per email.

De handleiding is 0,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info