541359
25
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
iLive Fixed Format Getting Started Guide 25 AP7141 iss.5
Scene Recall Safes lets you make selected input
channels, mix and DCA masters 'safe' so that their
parameters are not overwritten when a Scene is recalled.
Hold down the SCENE SAFES key and press the strip MIX
keys on channels you want to make safe. The SAFE icon in
the strip LCDs turns on for channels made safe.
Preamp Safes The mic preamp is automatically included
in channels made safe. If you do not want to make the
preamp safe, for example because you have patched it to
more than one input channel, you can change its safe status
using the Preamp screen Safe button.
Show memories
You can archive your configuration as a Show memory.
Show memories overwrite all the settings. These include
all current parameters, system DSP and control
configuration, all 250 Scenes and the user preferences.
Shows are stored on the TouchScreen computer within the
Surface and can be transferred between systems using a
USB key.
To archive your configuration go to the UTILITY /
Configuration / Show Manager screen. Touch the Archive
Show button. Type in a name using the onscreen keypad.
Press Enter to archive the show. This takes a few seconds to
complete.
Use the + button to Expand the list of Shows currently
stored. Template Shows are factory defaults that cannot be
deleted. They give you a quick starting point for mixing with
iLive and can be edited to create your own User shows.
To overwrite an existing User Show highlight it in the list and
touch Archive. The keypad opens with its name displayed.
Either type in a new name to archive it as a different show, or
just press Enter to overwrite the existing show.
To recall a Template, User or USB show go to the UTILITY /
Configuration / Show Manager screen, highlight a Show in
the list, then touch the Recall button. Confirm the action.
Note - Recalling a show overwrites all the system settings
and can change your mix architecture and patching. Make
sure existing settings are archived first if you want to keep
them to use again in the future. Show recall can take up to 3
minutes depending on how much information is stored.
Note - Show recall should only be used when reconfiguring
your system for a different event. This would typically be
done once for the event. Use the Scene memories rather
than Shows to recall settings for different scenes in a theatre
performance, bands at a music festival, day to day setups in
a church, and so on.
Note - For iLive to see the Shows on your USB key they
should be placed in an 'allenheath \ shows' folder in the root
directory of your key. If you have previously archived Shows
to the key using an iLive then this folder should have already
been created.
In situations where you want to import settings from a guest
engineer’s USB key but do not want to overwrite all the
system settings, you can use the USB Scene Transfer
function available in the UTILITY / Configuration screen.
Refer to the TouchScreen HELP manual for further
information.
Scene transfer Filter
User Show list
Factory default Template shows
Archive existing settings
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Allen-Heath iLive bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Allen-Heath iLive in de taal/talen: Engels als bijlage per email.

De handleiding is 2,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info