541359
22
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
iLive Fixed Format Getting Started Guide 22 AP7141 iss.5
Step 8 – Customise your configuration
Once you have familiarised yourself with the operation of the iLive through using a Template Show, you
may wish to take advantage of its unique flexibility by reconfiguring the channel and master strip layout,
DSP mix bus and stereo channel architecture, soft key assignments and more. You can ‘design’ your
own console to suit the way you like to work.
Note - These instructions are intended to get you started. For more information on configuring the iLive
and using its advanced features please refer to the TouchScreen HELP manual and other information
which you can download from the Allen & Heath web site.
To change the FADER STRIP LAYOUT
Any input, mix master, DCA master or Wedge/IEM master
can be assigned to any strip on any layer in any Bank.
Go to the SURFACE SETUP / Strip Setup screen.
Select Single to assign a single strip. Press a channel SEL
key. Assign Channel Type using the drop down menu.
Touch Channel Number and use the encoder to scroll to the
number you want. Press Apply.
Select Block to assign a range of strips. Press the start strip
SEL key. Press the end strip SEL key. Assign the channel
type and start number as above.
Note - The strip SEL keys are used to select which strips to
assign while in this mode. Make sure you exit SETUP mode
to restore normal channel processing selection.
To change the MIX BUS configuration
Press the TouchScreen MIXRACK key to view the current
channel settings and assignments of the 32 mix buses.
MIXRACK / Mixer Config / Mix Config - Use this screen to
change the mix bus configuration.
Configure the 32 mix buses as a combination of mono or
stereo Groups, Auxes, FX sends, Main mix and Matrix.
Configure all or as many buses as you need. Counters keep
a check on the number of buses, mix outputs and FX sends
remaining. Press Apply when finished.
For monitor mixing, you can also choose whether to apply
processing to the engineer's Wedge or IEM monitor master
when using the system as a dedicated Monitor console.
Note - Reconfiguring the channel stereo and mix bus
architecture makes major changes to the system DSP and
overwrites related settings. These changes can take up to 1
minute to process and should be made during system setup
and not during the show.
Note – Changing the DSP architecture resets the mix and
channel parameters. If you want to keep your settings store
these first as a Scene memory. Recall the Scene after
making your changes.
Unused (blank)
Input channel
Mono/St Group
Mono/St Aux
Mono/St FX send
Main
Mono/St Matrix
Input FX return
DCA master
Wedge/IEM master
None - No main mix, eg. Monitor mixer
M - Mono
LR - Stereo
LRSub - 3way mix with separate sub mix
LRM - 3way mix with send to a mono fill
LCR - Conventional LCR panning
LCRSub - LCR with separate sub mix
LCRM - LCR with send to mono fill
LCRplus - LCR with pan and blend control
Radio LRM – For broadcast application
Store settings before changing configuration
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Allen-Heath iLive bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Allen-Heath iLive in de taal/talen: Engels als bijlage per email.

De handleiding is 2,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info