541362
22
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
22 GL2400 User Guide
MONITOR, TALKBACK and SIGNAL GENERATOR
Console Monitor
Comprehensive engineer’s headphones and
local monitoring is provided. Select either LR or 2-track return as the
default source using the L-R / 2TRK switch. Pressing PFL or AFL
elsewhere on the console automatically overrides the current monitor
source with the signal from the channel or master selection. The red
PFL/AFL active indicator illuminates and the console meters display
the active signal.
The console monitor meters provide 12 LED indicators to accurately
display the signal level of the selected monitor source. Reduce the
gain or level if the red ‘+16’ peak indicator lights. For optimum
performance the signals should be adjusted to read an average ‘0’
with loudest peaks reaching around ‘+6’.
Use the MONITOR level control to adjust the level in the headphones
and local speaker monitor. We recommend you use closed ear
headphones in the range 30 to 600 ohms designed for live sound
monitoring. 100 ohm headphones are a popular choice.
WARNING: To avoid damage to your hearing do not operate
any close-to-ear monitoring such as headphones for long periods
at high volume. Continued exposure to high volume sound can
cause frequency selective or wide range hearing loss.
TALKBACK Individually assignable talkback is available to all the
main outputs. Plug in a suitable cable or gooseneck microphone. A
good quality dynamic or condenser vocal microphone is
recommended. Note that +48V phantom power is available at the
XLR as standard. If you prefer, this can be disabled by repositioning
an internal jumper link.
WARNING: Do not connect unbalanced sources or cables to
inputs with phantom power selected. To avoid loud clicks do not
press the TALK switch when plugging or unplugging the talkback
microphone.
First select the source you wish to talk to. You can select the auxes in
pairs, useful for communicating with the performers on stage. The
four groups are selected simultaneously, ideal for identifying a
multitrack recording. You can also talk to LR, ideal for announcements
to the audience. Once selected, press and hold TALK to route the mic
to the required destination. Adjust the talkback level using the TRIM
control below the TB mic XLR. Pressing TALK automatically dims the
level of the signal generator if it is turned on.
SIGNAL GENERATOR / PINK NOISE Press to select either
pink noise (up position) or a 1kHz sine wave tone as the test source.
Start with the trim control turned fully down. The generator ON switch
is recessed to prevent accidental operation. Press this with a pen or
pointed object. The green indicator lights to warn that the generator is
enabled.
The generator signal is routed to any source selected on the switch
bank above the TALK switch. Use the signal to test the loudspeaker
system and line up connected equipment. Pink noise is useful for
quickly testing the full range frequency operation and phasing/polarity
of loudspeakers. The 1kHz tone is better suited to lining up
equipment with its steady reading on the meters.
WARNING: We recommend you turn off the signal generator
once you have finished using it to test and line up your system.
This will prevent accidental operation during the show.
+16
MONITOR
PFL
TALK
0
GRP
L-R
10
L-R
2TRK
-6
-9
-20
-30
-16
-12
-3
0
+3
+6
+9
OSC/NOISE
TALKBACK
ON
MIN
L
MAX
OO
MIN MAX
2TRK REPLAY
TO LR
R
2TRK
+10
PHONES
SELECT
1-4
AUX
1-2
AUX
3-4
AUX
5-6
PINK
1kHz
MIC
POWER
AFL
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Allen-Heath GL 2400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Allen-Heath GL 2400 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info