630572
3
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
English
Editing the Sounds
You can edit the characteristics of each of the 9 programs and you should experiment
with the different parameters to see if there is a sound that better suits your musical
ideas. Each parameter is correlated with other parameters. If altering one parameter
doesn’t change the sound much, try altering the other parameters as well. The programs
can be returned to the factory presets very easily (see step 3 below), so you don’t have
to worry about losing the sounds that are already programmed.
1. Select a program, as shown in steps 6 and 7 above.
2. Turn the PARAMETER selector to the parameter that you want to edit (see next
PARAMETERS).
3. Adjust the parameter data value from 1 to 9 with the DATA control (the factory
preset is 5 for all parameters, except for PRESET, allowing you to set the offset of
+/- 4).
4. Repeat steps 2 and 3 until you have adjusted the parameters for that program.
When you have finished, the parameters are memorized automatically and you
can then go on to select another program number.
PARAMETERS
NOTE OFF LEVEL: Sets the sensitivity for triggering the end of the effect. Too high a
setting may cut off the effect sound early and too low a setting
may make the separate notes indistinguishable.
This is a global parameter, which means that if you change this
level in one program, all the other programs are changed too.
NOTE ON LEVEL: Sets the sensitivity for triggering the start of the effect. Too high
a setting may not trigger the effect sound and too low a setting
may trigger the sound by merely touching the strings.
This is a global parameter, which means that if you change this
level in one program, all the other programs are changed too.
PRESET: Sets the preset sound for the program (Preset 1 to 9 are assigned
to Proram 1 to 9 respectively as factory default).
Example: instead of program 1 playing preset 1, you could
change it so that program 1 plays preset 7, etc.
ATTACK: Sets how fast the effect sound sounds. If the change in sound is
not apparent, try setting the ENVELOPE DEPTH higher and/or
DYNAMICS lower.
DECAY: Sets how fast the effect sound diminishes. If the change in sound
is not apparent, try setting the ENVELOPE DEPTH higher and/
or DYNAMICS lower.
ENVELOPE DEPTH: Sets the amout of changes the effect sound makes. If the change
in sound is not apparent, try setting the DYNAMICS lower.
English
DYNAMICS: Sets the sensitivity of the tone variation dependant on how hard
or soft you hit a string. If the change in sound is not apparent, try
setting the ENVELOPE DEPTH lower.
CUTOFF: Adjusts the brightness of the effect sound.
RESONANCE: Adjusts how much the effect sound characterized by synthesizer
sound.
BALANCE: Sets the balance between the original bass sound and the syn-
thesized effect sound.
LEVEL: Sets the loudness of each program.
Specifications
Functions: Programs: 9 memorized preset sounds: DARK BUBBLE,
HARDCORE, KITAROH BASS, BRIGHT SYNTH, BRATS, FAT
BOTTOM, MAJESTY, HOT SPACE, HICCUPS.
Program Up
Effect on/off
Connectors: INPUT (Input impedance: 500k ohms or more)
OUTPUT (Output impedance: 1k ohms or less)
DC IN (9 Volts)
PROGRAM DOWN for optional footswitch connection.
Controls: INPUT LEVEL
PARAMETER
DATA
OUTPUT LEVEL
FOOTSWITCH x 2 (unlatch type) ON/OFF and PROGRAM UP.
Indicators: Input Level (LED x 3), Effect on/off (LED x 1), PROGRAM NO
(7 segment LED x 1), DATA (7 segment LED x 1)
Power requirements: 9V DC/180mA, AC adaptor MP-9
Accessories: Operators Manual, AC adaptor MP-9
Dimensions: 140 (W) x 175 (D) x 61 (H)mm
Weight: 750g
Copyright Notice
The AKAI SB1 is a computer-based instrument and uses software contained in ROM.
Software that is provided with the instrument, including information contained in this
manual, is copyrighted by applicable laws. You can use that software or information
concerning the instrument only for personal use. You are strictly prohibited to copy or
modify any part of the software or manual without written permission from AKAI
professional M.I. Corp. in Japan.
• Specifications are subject to change without notice.
Français
Avertissement
Le SB1 DEEP IMPACT est conçu pour être utilisé dans un environnement domestique
normal.
L’alimentation secteur des équipements électriques varie d’un pays à l’autre. Aussi, vérifiez que
la tension de votre SB1 correspond bien aux normes appliquées dans la région où vous vous
trouvez. En cas de doute, demandez conseil à un électricien qualifié ou à votre revendeur AKAI
professionnel.
120 V secteur @ 60 Hz pour les Etats-Unis et le Canada
Adaptateur CA MP-9 (CA)
220 V - 230/240 V secteur @ 50 Hz pour l’Europe
Adaptateur CA MP-9 (EVB)
Pour votre protection et celle du SB1 DEEP IMPACT
Ne touchez jamais l’adaptateur secteur avec des mains mouillées.
Débranchez toujours l’adaptateur secteur à la prise murale en tirant sur la prise et non sur
le cordon d’alimentation.
Ne confiez les réparations ou installations sur votre SB1 DEEP IMPACT qu’aux revendeurs
AKAI professionnel ou à des ingénieurs qualifiés. Mis à part le fait d’annuler la garantie, un
ingénieur non qualifié pourrait toucher des pièces internes sous tension et recevoir une
décharge électrique puissante.
Ne laissez aucun objet métallique sur le SB1 DEEP IMPACT ou tomber dedans.
N’utilisez que l’alimentation secteur fournie aux prises murales. N’utilisez jamais l’alimentation
CC.
Si de l’eau ou un liquide quelconque venait à tomber dans ou sur le SB1 DEEP IMPACT,
débranchez la prise et portez l’appareil chez votre revendeur.
Vérifiez si l’unité est bien aérée et qu’elle n’est pas exposée au soleil.
Pour éviter d’endommager les circuits internes, ainsi que la finition du boîtier, éloignez le SB1
DEEP IMPACT des sources directes de chaleur (po,êles, radiateurs, etc.).
Evitez d’utiliser des insecticides en aérosol, etc., à proximité du SB1 DEEP IMPACT. Ils
pourraient endommager la finition et s’enflammer.
N’utilisez pas d’alcool à brûler, de diluant, de solvant ou tout produit chimique équivalent pour
nettoyer le SB1 DEEP IMPACT. Ils pourraient endommager la finition.
Il est dangereux de modifier cet équipement qui pourrait mal fonctionner par la suite.
N’essayez jamais de modifier votre UB1 UNIBASS, de quelque manière que ce soit.
Assurez-vous que le SB1 DEEP IMPACT repose toujours sur une surface stable.
Pour assurer la performance optimisée de votre SB1 DEEP IMPACT, choisissez
soigneusement son emplacement. Evitez les endroits suivants:
1. Les endroits humides ou poussiéreux
2. Une pièce mal aérée
3. Une surface qui n’est pas horizontale
4. L’intérieur d’un véhicule comme une voiture, ou il serait soumis aux vibrations
5. Les endroits très chauds ou très froids
Assurez-vous d’attendre quelques secondes avant de rallumer l’unite apres que l’alimentation
ait ete coupee pour assurer un fonctionnement correct.
Lorsque vous connecter cet appareil à un autre équipement, assurez-vous que tout soit éteint
dans l'autre équipement afin d'empêcher tout dysfonctionnement ou dégât des enceintes.
Français
2
3
1
4
43
5 7
1
2
12 13
6
8 9 10
11
Si vous êtes un bassiste qui aimez ces lignes
synthétiques classiques de basse mais qui
n’avez jamais voulu apprendre à utiliser un
clavier, le DEEP IMPACT SB1 est simplement
ce que vous attendiez : vos sons de basse
synthétiques préférés au bout de vos doigts.
Avec 9 préréglages programmables à choisir,
vous pouvez simplement brancher et jouer ou
former les sons qui vous conviennent.
Avec le mode de couplage propre, lorsque vous désactivez l’effet, il n’y a pas de
déformation du son venant de l’entrée.
OUTPUT
<SORTIE>
Ceci se branche à votre amplificateur ou à l’entrée d’un autre effet.
PROGRAM DOWN input <Entrée PROGAM DOWN>
Vous pouvez connecter ici un interrupteur à pied vendu séparément pour
décrémenter les nombres de programme.
DC IN <
Entrée DC
>
Brancher ici l’adapteur secteur CA MP-9 (9 volts) fourni.
INPUT <ENTREE>
Brancher ici la basse.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Akai DEEP IMPACT SB1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Akai DEEP IMPACT SB1 in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 0,95 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info