630562
5
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
5
5. TRACK CONTROL FADERS – These faders control the VOL, PAN, SEND1-3 and USER1-3 levels of
the current 8 tracks and Master. Select what the faders control by holding SHIFT and pressing the
corresponding RECORD ARM / FADER MODE button above them.
6. TRACK ACTIVATORS – When lit, the current corresponding track is active. Pressing a button will
mute it (the button will become unlit). Press it again to activate it.
7. SOLO / CUE – Solos the selected track, sending it to the Cue Output. Press it again to un-solo it.
8. RECORD ARM / FADER MODE – Arms the selected track for recording. Press it again to disarm it.
Hold down SHIFT and press one of these buttons to select what the TRACK CONTROL FADERS
control (e.g., VOL, PAN, SEND1, etc.).
9. CUE LEVEL – Controls the volume sent to the Cue Output and the volume of sample auditioning.
NAVIGATION / TRACK SELECTION
These control specific functions in Ableton Live. When SHIFT is held down, pressing one of these buttons will
select a track – 1-8 or MASTER.
10. TRANSPORT CONTROLS – These transport controls – PLAY, STOP, and REC – represent the same
functions in the software.
11. MIDI OVERDUB – Turns MIDI Overdub on or off.
12. BANK SELECT – These pads move the
cursor/selection in Ableton Live by one track (left
or right) or by one scene (up or down). Holding
SHIFT while pressing this pad will move the
selection by 8 tracks (left or right) or by 5 scenes
(up or down), effectively changing the Clip
Launch View (see #1).
13. NOTE MODE – Press this button to put the CLIP LAUNCH / SESSION OVERVIEW buttons into Note
Mode. In Note Mode, the 8x5 grid will be divided into two equal halves with each button representing a
note in Ableton Live's Drum Rack. Moving left-to-right and bottom-to-top within the left half of the grid,
the buttons ascend chromatically (C1, C#1, D1, D#1, etc.) from C1 to G2. The right half of the grid
ascends similarly from G#2 to D#3. (This is ideal for using with Drum Rack, but it can also be used to
play melodic lines with any MIDI device.)
REAR PANEL OVERVIEW
1. POWER ON / OFF – Turns the APC20
on or off.
2. DC POWER ADAPTER INPUT – Plug in
the included 12V–2A DC power adapter
here.
3. USB CONNECTION – Plug a standard
USB cable into this outlet and into the USB port of your computer. This connection is used to send and
receive MIDI data to and from your computer.
4. POWER ADAPTER RESTRAINT – You can secure a power adapter cord to this restraint to prevent
accidental unplugging.
Note: In the software, a red rectangle around an
8x5 grid of clips represents APC20's current Clip
Launch View. You can change/shift the Clip
Launch View with APC20's controls (e.g. SHIFT
+ BANK SELECT).
1234
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Akai APC20 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Akai APC20 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info