532085
105
Verklein
Vergroot
Pagina terug
1/116
Pagina verder
Syn248 Installation and Configuration Guide Back to Contents
Appendixes 104
Appendix B: IP Addresses and Connectivity
An IP address is an individual numeric identification assigned to devices on a computer
network. At least one Syn248 device needs a network-assigned IP address on the subnet
shared with any computers that will allow access to the WebUI. Valid IP addresses on the
same subnet allow devices on the network to identify each other and enable
communication.
This IP address may be assigned from a Dynamic Host Configuration Protocol (DHCP)
server, or set statically to the same subnet, and will be separate from the self-assigned
169.254.xxx.xxx link-local address that the Syn248 devices use to communicate with
each other. When setting up the IP address on a Syn248 device, this network IP address
used for WebUI connectivity is the only address you can change.
The network IP addresses can be assigned in two ways:
1. The Syn248 device can request a network server to automatically assign an IP
address. This IP address is a dynamic assignment; the address is on lease from the
server. The lease is renewed as long as the device remains connected and there is
no change to the network. However, if the device is disconnected, or if there is a
network or AC power interruption, the lease may not be renewed (that is, the IP
address expires) and a new IP address may be assigned.
Most LANs use servers to automatically assign IP addresses. Syn248 defaults to
assuming that this automatic assignment will occur.
2. The Syn248 system administrator can manually assign a static system IP address. This
IP address does not change, even when there are network or AC power interruptions.
Some installations will require manual static IP assignment. You can assign a static
IP address for a Gateway using the device front panel interface. See “Gateway
Configuration” on page 74. You can assign a static IP address for a Deskset from the
Deskset IP Settings menu. See “IP Settings” on page 80.
Some servers have default settings that limit the number of network IP
addresses assigned to devices on the network. You should log in to your server
to confirm that the IP range is sufficient to accommodate at least one of the
Syn248 devices that you are adding as at least one Syn248 device needs an
assigned IP address to enable WebUI configuration activities. Consult the IT
department if you need help checking the server.
105

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw AT-T SYN 248 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van AT-T SYN 248 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info