532085
78
Verklein
Vergroot
Pagina terug
1/116
Pagina verder
Syn248 Installation and Configuration Guide Back to Contents
Device Configuration 77
Resetting Devices
You may need to manually restart a device or return a device to factory defaults (see
“Appendix D: Default Settings” on page 106). To reset a device, press the RESET button
shown in Figure 21 and Figure 22 on page 77 by inserting a pen or paper clip into the
hole and applying pressure to the button.
If the device does not respond or fails to synchronize with the system, the device should
be restarted. To restart the device without losing any custom settings, press the RESET
button for less than five seconds. You can get the same result by disconnecting and
reconnecting power to the device.
To completely reset the device to factory defaults, unplug the LAN cable from the device
and press the RESET button for more than five seconds. You might do this if the device
is not synchronized or you want to reset the IP address settings to Auto (DHCP). Any
static IP configurations are lost.
When resetting a Deskset to factory defaults, the User Settings, Personal directory,
Voicemail messages, Call Log, and the Redial list are all deleted. You can use this
complete reset when assigning Desksets to new users. If you do not disconnect the LAN
cable before pressing the RESET button, the extension number is retained. During the
reset, a PC connected to the Deskset PC port momentarily loses network connectivity.
If there is one Gateway in the system, but there are still Desksets connected, then only
the voice prompts and hold messages are deleted; the rest of the Auto Attendant settings
are maintained on the Desksets. If there is another Gateway, the other Gateway
maintains all system configuration settings.
Figure 21. Gateway Reset Button
Figure 22. Deskset Reset Button
To reset the entire system to factory defaults and completely clear the system
of all settings (Auto Attendant, hold message, and System Directory) and
Voicemail messages, unplug the LAN cables from all devices and press the
RESET button for more than five seconds on each device. Then reconnect all
devices to the LAN.
If you have already set up the system, back up the Deskset and system settings
before resetting the device to factory defaults. See “Back Up and Restore
Settings” on page 58.
DC 5.1V
LINE 1
LINE 2 LINE 3 LINE 4 BYPASS
LAN
RESET
LINE 1
LINE 2
LINE 3
LINE 4
POWER
SELECT CANCEL
DOWN
UP
+-
Reset Button
LAN Port
Reset Button
78

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw AT-T SYN 248 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van AT-T SYN 248 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info