49527
3
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
AUG 05, 2002 3 of 8 PD99025-1
When the machine is first powered up, the A/M will carry out a self-functional testing for 5 seconds and
the Dual digit display will start to running until this testing complete. Then, it will sound with a long beep
as well as a “00” show on the display. The A/M goes to the standby mode.
Answering Machine Operation
1.Turn on and off the answering machine
Press and hold the ‘On/Off’ button by 2sec The answering machine is activated on when it is
originally in off mode. It will prompt ‘Answering
machine on, Announcement one’ and a short beep is
followed. The display will shows the number of
message being recorded.
Press the ‘On/OFF’ button again (During A/M at
standby mode). To select OGM2.
A short beep will be heard then prompt
‘Announcement two’. Switch to “answer only” mode.
Press again to switch back to ‘Answer and record
mode’. To select back to OGM1.
After a short beep, then prompt ‘Announcement one’.
Switch to answer and record mode, answer with
recorded OGM.
Press and hold the ‘On/Off’ button again (for 2sec) The answering machine is turn off. Prompt
‘Answering off’ and two short beep will be heard.
The display will shows two dash ‘- -‘.
Note: When the answering machine is powered on, the status of the DTAM should be defaulted as in
answer ON mode.
2. Set up the answering machine
2.1 OGM recording
Press and hold ‘OGM’ button for 2 seconds After a long beep, A/M start the OGM recording and
the display shows ‘ Or’ to indicate OGM recording.
Press ‘Stop’ button to end recording. A long beep to indicate stop recording then play the
OGM once and followed be a long beep. The display
shows ‘OP’ to indicate OGM Playback.
Press ‘OGM’ once. To play the announcement once again, similarly ‘OP’
is displaying on the 7-segment.
To recall the default OGM by press the ‘Delete’ key
during OGM playback
Default announcement will be play on the speaker.
Toggle OGM1 or OGM2 By press the ‘STOP’ key once, the A/M will prompt
‘Announcement two’ & display ‘o2’, To press ‘STOP’
key again, it will prompt ‘Announcement one’ &
display ‘o2’.
Note: Default OGM1 – such as ‘Sorry I can’t answer call now, please leave your message after the beep’,
Default OGM2 – such as ‘Please call later’.
The time duration of OGM recording should be with 2 seconds < duration < 2 min.
2.2 Set day and time, the default day and time is “Sunday, 12:00”
Press and hold the ‘Time’ button for 2 seconds
(Set day of week)
After a short beep, the A/M is ready to set the day of
week, then, prompt ‘ Please set day, pause, then
prompt current day. The symbol “CL” will display on
the 7-segment too.
Press ‘FF’ or ‘RW’ to select days Prompt at each selection.
Press ‘Time’ button to accept day setting and jump to
“hours setting”
Prompt ‘Please set time’, pause then prompt current
hour.
Press ‘FF’ or ‘RW’ to select hours Prompt at each selection.
Press ‘Time’ button to accept the hour setting and Prompt ‘Please set minute’, pause then prompt current
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw AEG AB350 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van AEG AB350 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van AEG AB350

AEG AB350 Gebruiksaanwijzing - Nederlands, Deutsch - 25 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info