534678
51
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
UP Plus
3D Printer User Manual
8.3 How to clean
the
Never attempt to remove the nozzle when the extruder block is cold
First intilise the printer, then click “Withdraw” in the maintenance
Once the printer beeps,
might need to gently push the nozzle down while unscrewing the nozzle to remove it, as
the remaining plastic will act like a soft glue holding it in place, hence t
“withdraw” to heat up the residue plastic in the nozzle.
Soak the nozzle for 24hrs in acetone.
Then using the needle nose tweezers remove any left over plastic. Use a torch or light to
shine into the nozzle to see if it is clean.
If you sti
ll have residue plastic then soak in acetone again
It’s recommended to have a spare nozzle or even better a spare extruder block at hand.
If the nozzle is blocked, remove the nozzle and clean it.
zle is hot)
The extruder and platform are hot. Use gloves when working in this area of
printer.
4.
Troubleshooting
3D Printer User Manual
v 2013.6.10
the
nozzle
Never attempt to remove the nozzle when the extruder block is cold
!!
First intilise the printer, then click “Withdraw” in the maintenance
screen.
Once the printer beeps,
using the gloves and nozzle spanner,
unscrew the nozzle. You
might need to gently push the nozzle down while unscrewing the nozzle to remove it, as
the remaining plastic will act like a soft glue holding it in place, hence t
“withdraw” to heat up the residue plastic in the nozzle.
Soak the nozzle for 24hrs in acetone.
Then using the needle nose tweezers remove any left over plastic. Use a torch or light to
shine into the nozzle to see if it is clean.
ll have residue plastic then soak in acetone again
for a further 24hrs
It’s recommended to have a spare nozzle or even better a spare extruder block at hand.
If the nozzle is blocked, remove the nozzle and clean it.
(only when the no
zle is hot)
The extruder and platform are hot. Use gloves when working in this area of
printer.
Troubleshooting
screen.
unscrew the nozzle. You
might need to gently push the nozzle down while unscrewing the nozzle to remove it, as
the remaining plastic will act like a soft glue holding it in place, hence t
he reason to
Then using the needle nose tweezers remove any left over plastic. Use a torch or light to
for a further 24hrs
.
It’s recommended to have a spare nozzle or even better a spare extruder block at hand.
(only when the no
z-
The extruder and platform are hot. Use gloves when working in this area of
51

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw 3Dprintingsystems UP Plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van 3Dprintingsystems UP Plus in de taal/talen: Engels als bijlage per email.

De handleiding is 7,81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info